电镀与涂饰
電鍍與塗飾
전도여도식
ELECTROPLATING & FINISHING
2010年
2期
6-8,13
,共4页
王凤平%李瑞雪%丁言伟%刘照斌%林小光%刘志远
王鳳平%李瑞雪%丁言偉%劉照斌%林小光%劉誌遠
왕봉평%리서설%정언위%류조빈%림소광%류지원
镁合金%电镀铜%超声波%表面形貌%耐蚀性
鎂閤金%電鍍銅%超聲波%錶麵形貌%耐蝕性
미합금%전도동%초성파%표면형모%내식성
magnesium alloy%copper electroplating%ultrasonic%surface morphology%corrosion resistance
利用超声波辅助电镀技术在AZ91D镁合金表面电镀铜.通过极化曲线、SEM、结合力测试和NaCl溶液浸泡试验,研究了超声波对镁合金电镀铜的影响.试验表明,无超声波辅助电镀所得铜层表面晶粒粗糙,结合力较差;而利用超声波辅助电镀技术所得铜层表面晶粒均匀、平整,结合力强,耐蚀性较好.SEM观察表明,超声波功率对镀层性能也有一定影响,80W超声功率下得到的镀层表面比40W超生功率的平整.
利用超聲波輔助電鍍技術在AZ91D鎂閤金錶麵電鍍銅.通過極化麯線、SEM、結閤力測試和NaCl溶液浸泡試驗,研究瞭超聲波對鎂閤金電鍍銅的影響.試驗錶明,無超聲波輔助電鍍所得銅層錶麵晶粒粗糙,結閤力較差;而利用超聲波輔助電鍍技術所得銅層錶麵晶粒均勻、平整,結閤力彊,耐蝕性較好.SEM觀察錶明,超聲波功率對鍍層性能也有一定影響,80W超聲功率下得到的鍍層錶麵比40W超生功率的平整.
이용초성파보조전도기술재AZ91D미합금표면전도동.통과겁화곡선、SEM、결합력측시화NaCl용액침포시험,연구료초성파대미합금전도동적영향.시험표명,무초성파보조전도소득동층표면정립조조,결합력교차;이이용초성파보조전도기술소득동층표면정립균균、평정,결합력강,내식성교호.SEM관찰표명,초성파공솔대도층성능야유일정영향,80W초성공솔하득도적도층표면비40W초생공솔적평정.
The influence of ultrasonic on electroplating Cu on A291D magnesium alloy was studied by using polarization curves, SEM, adhesion test and NaCl solution immersion test. The resuks showed that the Cu deposit on A291D is rough and has poor adhesion without ultrasonic agitation. However, the Cu deposit on A291D with ultrasonic agitation has following advantages: uniform and smooth deposit grains, strong adhesion and good corrosion resistance. The power of ultrasonic has certain effect on the uniformity of Cu coating. The copper coating obtained with 80 W ultrasonic is more uniform than that obtained with 40 W.