装备制造技术
裝備製造技術
장비제조기술
EQUIPMENT MANUFACTURING TECHNOLOGY
2010年
4期
1-2,6
,共3页
龚叶利%施晓春%刘俊%章学磊%汪通悦%孙全平
龔葉利%施曉春%劉俊%章學磊%汪通悅%孫全平
공협리%시효춘%류준%장학뢰%왕통열%손전평
薄壁零件%切削力%动态铣削力系数%仿真程序
薄壁零件%切削力%動態鐉削力繫數%倣真程序
박벽령건%절삭력%동태선삭력계수%방진정서
薄壁结构零件在加工过程中,极易发生变形和切削振动,这对提高加工质量和加工效率十分不利;利用MIKRON UCP800DURO高速加工中心和相关仪器,针对2A12铝合金薄壁结构零件进行铣削实验,测得特定刀具和工件系统的动态铣削力系数;编制Matlab仿真程序,将仿真的力和试验测量的力进行比较,为进一步研究薄壁零件加工规律奠定了必要的基础.
薄壁結構零件在加工過程中,極易髮生變形和切削振動,這對提高加工質量和加工效率十分不利;利用MIKRON UCP800DURO高速加工中心和相關儀器,針對2A12鋁閤金薄壁結構零件進行鐉削實驗,測得特定刀具和工件繫統的動態鐉削力繫數;編製Matlab倣真程序,將倣真的力和試驗測量的力進行比較,為進一步研究薄壁零件加工規律奠定瞭必要的基礎.
박벽결구령건재가공과정중,겁역발생변형화절삭진동,저대제고가공질량화가공효솔십분불리;이용MIKRON UCP800DURO고속가공중심화상관의기,침대2A12려합금박벽결구령건진행선삭실험,측득특정도구화공건계통적동태선삭력계수;편제Matlab방진정서,장방진적력화시험측량적력진행비교,위진일보연구박벽령건가공규률전정료필요적기출.