北京科技大学学报
北京科技大學學報
북경과기대학학보
JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING
2006年
7期
630-634
,共5页
秦子然%刘国权%宋月鹏%尹江辉
秦子然%劉國權%宋月鵬%尹江輝
진자연%류국권%송월붕%윤강휘
感应热处理%有限元模拟%温度场%显微组织
感應熱處理%有限元模擬%溫度場%顯微組織
감응열처리%유한원모의%온도장%현미조직
利用ANSYS有限元分析软件,对45#钢特定形状底盘零件感应加热、冷却的全过程进行了温度场的二维有限元模拟分析,进而利用工件冷却前后内部温度变化的模拟结果和45#钢的CCT曲线获得了冷却后工件内部组织分布情况.利用工业条件下的零件热处理实验对温度场和微观组织的模拟结果进行了验证,实验与模拟结果吻合良好.
利用ANSYS有限元分析軟件,對45#鋼特定形狀底盤零件感應加熱、冷卻的全過程進行瞭溫度場的二維有限元模擬分析,進而利用工件冷卻前後內部溫度變化的模擬結果和45#鋼的CCT麯線穫得瞭冷卻後工件內部組織分佈情況.利用工業條件下的零件熱處理實驗對溫度場和微觀組織的模擬結果進行瞭驗證,實驗與模擬結果吻閤良好.
이용ANSYS유한원분석연건,대45#강특정형상저반령건감응가열、냉각적전과정진행료온도장적이유유한원모의분석,진이이용공건냉각전후내부온도변화적모의결과화45#강적CCT곡선획득료냉각후공건내부조직분포정황.이용공업조건하적령건열처리실험대온도장화미관조직적모의결과진행료험증,실험여모의결과문합량호.