金刚石与磨料磨具工程
金剛石與磨料磨具工程
금강석여마료마구공정
DIAMOND & ABRASIVES ENGINNERING
2007年
6期
42-46
,共5页
穆云超%卢金斌%樊平%毋新房
穆雲超%盧金斌%樊平%毌新房
목운초%로금빈%번평%무신방
铁%金刚石%形貌%性能
鐵%金剛石%形貌%性能
철%금강석%형모%성능
本文以还原铁粉为结合剂,通过金刚石工具实际制备条件下的烧结试验,分析了在实际生产环境下,铁元素对金刚石的形貌和性能的影响,总结了在铁元素作用下,烧结温度和保温时间对金刚石冲击韧性等机械性能以及形貌的影响规律.结果表明:随着温度的升高和时间的延长,铁元素对金刚石冲击韧性的影响愈加严重,但在一定的温度、时间范围内,铁元素对金刚石冲击韧性的影响并不明显,可以在T=900℃~1100℃t≤15 min范围内选择合适的工艺规范;铁元素的加入,对金刚石的抗静压强度影响不大;在一定的温度和保温时间等条件下,铁元素对金刚石形貌的影响主要表现在表面的刻蚀,从而在金刚石表面形成蜂窝状结构,这种作用优先发生在{100}面族.
本文以還原鐵粉為結閤劑,通過金剛石工具實際製備條件下的燒結試驗,分析瞭在實際生產環境下,鐵元素對金剛石的形貌和性能的影響,總結瞭在鐵元素作用下,燒結溫度和保溫時間對金剛石遲擊韌性等機械性能以及形貌的影響規律.結果錶明:隨著溫度的升高和時間的延長,鐵元素對金剛石遲擊韌性的影響愈加嚴重,但在一定的溫度、時間範圍內,鐵元素對金剛石遲擊韌性的影響併不明顯,可以在T=900℃~1100℃t≤15 min範圍內選擇閤適的工藝規範;鐵元素的加入,對金剛石的抗靜壓彊度影響不大;在一定的溫度和保溫時間等條件下,鐵元素對金剛石形貌的影響主要錶現在錶麵的刻蝕,從而在金剛石錶麵形成蜂窩狀結構,這種作用優先髮生在{100}麵族.
본문이환원철분위결합제,통과금강석공구실제제비조건하적소결시험,분석료재실제생산배경하,철원소대금강석적형모화성능적영향,총결료재철원소작용하,소결온도화보온시간대금강석충격인성등궤계성능이급형모적영향규률.결과표명:수착온도적승고화시간적연장,철원소대금강석충격인성적영향유가엄중,단재일정적온도、시간범위내,철원소대금강석충격인성적영향병불명현,가이재T=900℃~1100℃t≤15 min범위내선택합괄적공예규범;철원소적가입,대금강석적항정압강도영향불대;재일정적온도화보온시간등조건하,철원소대금강석형모적영향주요표현재표면적각식,종이재금강석표면형성봉와상결구,저충작용우선발생재{100}면족.