过程工程学报
過程工程學報
과정공정학보
The Chinese Journal of Process Engineering
2012年
2期
271-276
,共6页
毕经汉%唐萍%文光华%丁铃%苏刚
畢經漢%唐萍%文光華%丁鈴%囌剛
필경한%당평%문광화%정령%소강
异钢种连浇%交接坯位置%预测模型%水力学模拟
異鋼種連澆%交接坯位置%預測模型%水力學模擬
이강충련요%교접배위치%예측모형%수역학모의
以重钢1#板坯连铸机为对象,通过水力学物理模拟研究了通钢量和中间包余钢量与铸坯长度方向无量纲浓度的关系.结果表明,增大通钢量和降低余钢量都会减小交接坯长度,在重钢浇注条件允许的最大通钢量及余钢量变化范围内,通钢量对同一时刻无量纲浓度影响的最大差为21%,余钢量不同产生的最大差为73%,说明余钢量对交接坯长度影响更显著.在水模实验基础上通过数学回归和插值法,建立了异钢种连浇过程铸坯交接坯位置和长度的预测模型,并通过实际交接坯取样分析对模型进行了修正.修正模型预测结果与现场取样结果比较,预测精度达95%,高于相关文献水平.
以重鋼1#闆坯連鑄機為對象,通過水力學物理模擬研究瞭通鋼量和中間包餘鋼量與鑄坯長度方嚮無量綱濃度的關繫.結果錶明,增大通鋼量和降低餘鋼量都會減小交接坯長度,在重鋼澆註條件允許的最大通鋼量及餘鋼量變化範圍內,通鋼量對同一時刻無量綱濃度影響的最大差為21%,餘鋼量不同產生的最大差為73%,說明餘鋼量對交接坯長度影響更顯著.在水模實驗基礎上通過數學迴歸和插值法,建立瞭異鋼種連澆過程鑄坯交接坯位置和長度的預測模型,併通過實際交接坯取樣分析對模型進行瞭脩正.脩正模型預測結果與現場取樣結果比較,預測精度達95%,高于相關文獻水平.
이중강1#판배련주궤위대상,통과수역학물리모의연구료통강량화중간포여강량여주배장도방향무량강농도적관계.결과표명,증대통강량화강저여강량도회감소교접배장도,재중강요주조건윤허적최대통강량급여강량변화범위내,통강량대동일시각무량강농도영향적최대차위21%,여강량불동산생적최대차위73%,설명여강량대교접배장도영향경현저.재수모실험기출상통과수학회귀화삽치법,건립료이강충련요과정주배교접배위치화장도적예측모형,병통과실제교접배취양분석대모형진행료수정.수정모형예측결과여현장취양결과비교,예측정도체95%,고우상관문헌수평.