兰州理工大学学报
蘭州理工大學學報
란주리공대학학보
JOURNAL OF LANZHOU UNIVERSITY OF TECHNOLOGY
2008年
5期
1-4
,共4页
阎汝煦%毛松科%罗永春%刘刚%康龙
閻汝煦%毛鬆科%囉永春%劉剛%康龍
염여후%모송과%라영춘%류강%강룡
AlH3%机械球磨%固相化学反应%热力学性能
AlH3%機械毬磨%固相化學反應%熱力學性能
AlH3%궤계구마%고상화학반응%열역학성능
以LiAlH4和AlCl3为原料,采用机械球磨固相化学反应方法合成铝氢化合物,通过XRD、TG-DSC和MS等方法对反应产物进行分析和表征,研究不同球磨时间对球磨反应体系合成产物的转变规律和对产物热力学性能的影响.结果表明,随着球磨时间的增加,合成反应按3LiAlH4+AlCl3→4AlH3+3LiCl方向进行并形成了非晶态铝氢化合物(AlH3),球磨20 h时反应基本完全.球磨产物的放氢失重温度主要集中在100~200 ℃,对应的DSC曲线在135 ℃和165 ℃出现2个放热峰,随球磨时间的增加,失重量减少,最大失重质量分数达到3.5%~6.1%.球磨过程中形成的反应产物LiCl*H2O及少量AlH3发生分解是影响球磨反应产物最大失重量的主要因素.
以LiAlH4和AlCl3為原料,採用機械毬磨固相化學反應方法閤成鋁氫化閤物,通過XRD、TG-DSC和MS等方法對反應產物進行分析和錶徵,研究不同毬磨時間對毬磨反應體繫閤成產物的轉變規律和對產物熱力學性能的影響.結果錶明,隨著毬磨時間的增加,閤成反應按3LiAlH4+AlCl3→4AlH3+3LiCl方嚮進行併形成瞭非晶態鋁氫化閤物(AlH3),毬磨20 h時反應基本完全.毬磨產物的放氫失重溫度主要集中在100~200 ℃,對應的DSC麯線在135 ℃和165 ℃齣現2箇放熱峰,隨毬磨時間的增加,失重量減少,最大失重質量分數達到3.5%~6.1%.毬磨過程中形成的反應產物LiCl*H2O及少量AlH3髮生分解是影響毬磨反應產物最大失重量的主要因素.
이LiAlH4화AlCl3위원료,채용궤계구마고상화학반응방법합성려경화합물,통과XRD、TG-DSC화MS등방법대반응산물진행분석화표정,연구불동구마시간대구마반응체계합성산물적전변규률화대산물열역학성능적영향.결과표명,수착구마시간적증가,합성반응안3LiAlH4+AlCl3→4AlH3+3LiCl방향진행병형성료비정태려경화합물(AlH3),구마20 h시반응기본완전.구마산물적방경실중온도주요집중재100~200 ℃,대응적DSC곡선재135 ℃화165 ℃출현2개방열봉,수구마시간적증가,실중량감소,최대실중질량분수체도3.5%~6.1%.구마과정중형성적반응산물LiCl*H2O급소량AlH3발생분해시영향구마반응산물최대실중량적주요인소.