热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2011年
23期
208-210
,共3页
袁守谦%姚成功%陈列%王治钧
袁守謙%姚成功%陳列%王治鈞
원수겸%요성공%진렬%왕치균
45钢%连铸坯%角裂%工艺
45鋼%連鑄坯%角裂%工藝
45강%련주배%각렬%공예
45钢连铸坯在生产中易出现铸坯的内部角裂缺陷.通过低倍试验、金相法和探针能谱分析,对缺陷作了分析.基于ANSYS对结晶器凝固过程进行温度场模拟得出,缺陷萌生于结晶器内,根本原因是铸坯在结晶器中凝固传热不均导致铸坯偏角区出现热节区效应,从而诱导产生热应力作用于凝固前沿致使沿柱状晶晶间铁素体开裂.通过重新设定结晶器铜管圆角半径和优化工艺,最终避免了内部角裂.
45鋼連鑄坯在生產中易齣現鑄坯的內部角裂缺陷.通過低倍試驗、金相法和探針能譜分析,對缺陷作瞭分析.基于ANSYS對結晶器凝固過程進行溫度場模擬得齣,缺陷萌生于結晶器內,根本原因是鑄坯在結晶器中凝固傳熱不均導緻鑄坯偏角區齣現熱節區效應,從而誘導產生熱應力作用于凝固前沿緻使沿柱狀晶晶間鐵素體開裂.通過重新設定結晶器銅管圓角半徑和優化工藝,最終避免瞭內部角裂.
45강련주배재생산중역출현주배적내부각렬결함.통과저배시험、금상법화탐침능보분석,대결함작료분석.기우ANSYS대결정기응고과정진행온도장모의득출,결함맹생우결정기내,근본원인시주배재결정기중응고전열불균도치주배편각구출현열절구효응,종이유도산생열응력작용우응고전연치사연주상정정간철소체개렬.통과중신설정결정기동관원각반경화우화공예,최종피면료내부각렬.