热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2012年
8期
144-146
,共3页
铝合金%表面机械研磨法%纳米晶化
鋁閤金%錶麵機械研磨法%納米晶化
려합금%표면궤계연마법%납미정화
采用表面机械研磨的方法,在Al-Zn-Mg合金表面获得了厚20μm、晶粒尺寸为20~25 nm的纳米晶化层,使其表层硬度提高了约4倍.经透射电镜(TEM)观察发现,铝合金在表面机械研磨的过程中,原始粗晶粒内部出现位错墙和位错缠绕结构.随着变形量的增大,位错墙和位错缠绕结构逐步演变成小角度取向差的亚晶界,直至变成大角晶界,形成了纳米晶化层.
採用錶麵機械研磨的方法,在Al-Zn-Mg閤金錶麵穫得瞭厚20μm、晶粒呎吋為20~25 nm的納米晶化層,使其錶層硬度提高瞭約4倍.經透射電鏡(TEM)觀察髮現,鋁閤金在錶麵機械研磨的過程中,原始粗晶粒內部齣現位錯牆和位錯纏繞結構.隨著變形量的增大,位錯牆和位錯纏繞結構逐步縯變成小角度取嚮差的亞晶界,直至變成大角晶界,形成瞭納米晶化層.
채용표면궤계연마적방법,재Al-Zn-Mg합금표면획득료후20μm、정립척촌위20~25 nm적납미정화층,사기표층경도제고료약4배.경투사전경(TEM)관찰발현,려합금재표면궤계연마적과정중,원시조정립내부출현위착장화위착전요결구.수착변형량적증대,위착장화위착전요결구축보연변성소각도취향차적아정계,직지변성대각정계,형성료납미정화층.