激光技术
激光技術
격광기술
LASER TECHNOLOGY
2005年
6期
568-571
,共4页
晁明举%余菊美%梁二军%袁斌
晁明舉%餘菊美%樑二軍%袁斌
조명거%여국미%량이군%원빈
激光熔覆%裂纹%显微组织%铁基合金%Nb2O5
激光鎔覆%裂紋%顯微組織%鐵基閤金%Nb2O5
격광용복%렬문%현미조직%철기합금%Nb2O5
在45#钢基底上进行了铁基合金和铁基合金加Nb2O5的激光熔覆对比实验.通过工艺参数和Nb2O5含量的优选,获得了成形良好、无裂纹、组织致密均匀的高质量铁基激光熔覆层.采用渗透法观察熔覆层表面裂纹,利用金相显微镜和扫描电镜观察熔覆层横断面的显微组织,使用X射线衍射仪对熔覆层进行物相分析,并测试了熔覆层的硬度.分析结果表明,G312+ 0.6% Nb2O5(质量分数)熔覆层组织为细小的先共晶析出的碳化物等强化相均匀分布在由γ(Fe,Ni)固溶体和多种金属间化合物组成的共晶体中,且生长方向不同.Nb2O5改善铁基熔覆层抗开裂能力的原因一方面是Nb占据晶界增强了晶界结合,另一方面,部分Nb2O5受C的还原作用生成NbC,先共晶析出,成为异质核,提高了凝固结晶过程中的形核率,使得熔覆层组织得以细化,且降低了熔体中的C浓度,减少了Cr(Fe)碳化物脆性相的体积分数,熔覆层韧性增强,裂纹敏感性降低.
在45#鋼基底上進行瞭鐵基閤金和鐵基閤金加Nb2O5的激光鎔覆對比實驗.通過工藝參數和Nb2O5含量的優選,穫得瞭成形良好、無裂紋、組織緻密均勻的高質量鐵基激光鎔覆層.採用滲透法觀察鎔覆層錶麵裂紋,利用金相顯微鏡和掃描電鏡觀察鎔覆層橫斷麵的顯微組織,使用X射線衍射儀對鎔覆層進行物相分析,併測試瞭鎔覆層的硬度.分析結果錶明,G312+ 0.6% Nb2O5(質量分數)鎔覆層組織為細小的先共晶析齣的碳化物等彊化相均勻分佈在由γ(Fe,Ni)固溶體和多種金屬間化閤物組成的共晶體中,且生長方嚮不同.Nb2O5改善鐵基鎔覆層抗開裂能力的原因一方麵是Nb佔據晶界增彊瞭晶界結閤,另一方麵,部分Nb2O5受C的還原作用生成NbC,先共晶析齣,成為異質覈,提高瞭凝固結晶過程中的形覈率,使得鎔覆層組織得以細化,且降低瞭鎔體中的C濃度,減少瞭Cr(Fe)碳化物脆性相的體積分數,鎔覆層韌性增彊,裂紋敏感性降低.
재45#강기저상진행료철기합금화철기합금가Nb2O5적격광용복대비실험.통과공예삼수화Nb2O5함량적우선,획득료성형량호、무렬문、조직치밀균균적고질량철기격광용복층.채용삼투법관찰용복층표면렬문,이용금상현미경화소묘전경관찰용복층횡단면적현미조직,사용X사선연사의대용복층진행물상분석,병측시료용복층적경도.분석결과표명,G312+ 0.6% Nb2O5(질량분수)용복층조직위세소적선공정석출적탄화물등강화상균균분포재유γ(Fe,Ni)고용체화다충금속간화합물조성적공정체중,차생장방향불동.Nb2O5개선철기용복층항개렬능력적원인일방면시Nb점거정계증강료정계결합,령일방면,부분Nb2O5수C적환원작용생성NbC,선공정석출,성위이질핵,제고료응고결정과정중적형핵솔,사득용복층조직득이세화,차강저료용체중적C농도,감소료Cr(Fe)탄화물취성상적체적분수,용복층인성증강,렬문민감성강저.