CAJ | 학술논문

We have prepared Nb thin films with e-beam evaporation under UHV conditions. Al thin films were deposited by resistive heating in the UHV chamber. The preparation of these films and the tri-layers of Nb/AlOx/Nb were intended for their use in Josephson junctions. The surface studies of these films were undertaken by using scanning electron microscope and atomic force microscope in the non-contact mode, whilst the interface analysis was carried out by depth profiling using scanning Auger microprobe. These studies have revealed that Nb films grown on AlOx are smoother than the ones grown on Si. Further, it is seen that Al diffuses into Nb on both sides and that the interface is very broad. This intermixing of various materials results in the failure of the tri-layers when subjected to application in SQUIDs.