计量学报
計量學報
계량학보
ACTA METROLOGICA SINICA
2007年
z1期
118-120
,共3页
计量学%温度%校验箱%温场分布
計量學%溫度%校驗箱%溫場分佈
계량학%온도%교험상%온장분포
介绍了可用作温度测量仪表校准设备之一的WJ-1型高精度温度校验箱的结构、原理、温度控制方式及其有关温度性能的实测结果.采用上送风、下回风的"直风"结构和自适应PID控制技术,在校验箱工作区域获得了较好的温场分布.实验结果表明,在(-40~50)℃范围内校验箱温度偏差优于±0.30 ℃,温度均匀度优于0.30 ℃,温度波动度优于±0.10 ℃/30 min.
介紹瞭可用作溫度測量儀錶校準設備之一的WJ-1型高精度溫度校驗箱的結構、原理、溫度控製方式及其有關溫度性能的實測結果.採用上送風、下迴風的"直風"結構和自適應PID控製技術,在校驗箱工作區域穫得瞭較好的溫場分佈.實驗結果錶明,在(-40~50)℃範圍內校驗箱溫度偏差優于±0.30 ℃,溫度均勻度優于0.30 ℃,溫度波動度優于±0.10 ℃/30 min.
개소료가용작온도측량의표교준설비지일적WJ-1형고정도온도교험상적결구、원리、온도공제방식급기유관온도성능적실측결과.채용상송풍、하회풍적"직풍"결구화자괄응PID공제기술,재교험상공작구역획득료교호적온장분포.실험결과표명,재(-40~50)℃범위내교험상온도편차우우±0.30 ℃,온도균균도우우0.30 ℃,온도파동도우우±0.10 ℃/30 min.