稀有金属材料与工程
稀有金屬材料與工程
희유금속재료여공정
RARE METAL MATERIALS AND ENGINEERNG
2007年
z1期
889-891
,共3页
陈黄鹂%罗发%周万城%朱冬梅%吴红焕
陳黃鸝%囉髮%週萬城%硃鼕梅%吳紅煥
진황리%라발%주만성%주동매%오홍환
溶胶-凝胶%Al3+掺杂%ZAO薄膜
溶膠-凝膠%Al3+摻雜%ZAO薄膜
용효-응효%Al3+참잡%ZAO박막
研究了用溶胶-凝胶法制备ZAO薄膜的工艺、掺杂及其显微结构.用六水合氯化铝在溶胶中引入Al2O3.掺杂Al的含量为1%,3%,6%和9%.用浸涂法在石英玻璃基片上浸涂ZnAO薄膜,研究了热处理、掺杂对ZAO薄膜相组成和显微结构的影响.X射线衍射结果表明,衍射图谱中无Al2O3的衍射峰.随着掺杂量的变化,ZnO主要衍射峰的位置、晶面间距均发生了有规律的变化,说明Al掺杂进了ZnO晶格中.研究结果表明,溶胶浓度、Al掺杂量、热处理温度都影响薄膜的显微结构.当薄膜厚度较大时,热处理过程中ZnO晶粒呈现明显的择优生长现象.
研究瞭用溶膠-凝膠法製備ZAO薄膜的工藝、摻雜及其顯微結構.用六水閤氯化鋁在溶膠中引入Al2O3.摻雜Al的含量為1%,3%,6%和9%.用浸塗法在石英玻璃基片上浸塗ZnAO薄膜,研究瞭熱處理、摻雜對ZAO薄膜相組成和顯微結構的影響.X射線衍射結果錶明,衍射圖譜中無Al2O3的衍射峰.隨著摻雜量的變化,ZnO主要衍射峰的位置、晶麵間距均髮生瞭有規律的變化,說明Al摻雜進瞭ZnO晶格中.研究結果錶明,溶膠濃度、Al摻雜量、熱處理溫度都影響薄膜的顯微結構.噹薄膜厚度較大時,熱處理過程中ZnO晶粒呈現明顯的擇優生長現象.
연구료용용효-응효법제비ZAO박막적공예、참잡급기현미결구.용륙수합록화려재용효중인입Al2O3.참잡Al적함량위1%,3%,6%화9%.용침도법재석영파리기편상침도ZnAO박막,연구료열처리、참잡대ZAO박막상조성화현미결구적영향.X사선연사결과표명,연사도보중무Al2O3적연사봉.수착참잡량적변화,ZnO주요연사봉적위치、정면간거균발생료유규률적변화,설명Al참잡진료ZnO정격중.연구결과표명,용효농도、Al참잡량、열처리온도도영향박막적현미결구.당박막후도교대시,열처리과정중ZnO정립정현명현적택우생장현상.