铸造设备与工艺
鑄造設備與工藝
주조설비여공예
FOUNDRY EQUIPMENT AND TECHNOLOGY
2009年
2期
20-21,24
,共3页
双金属复合%钢/铝%感应加热
雙金屬複閤%鋼/鋁%感應加熱
쌍금속복합%강/려%감응가열
双金属复合铸件外层采用铸造铝合金,内层选取碳素结构钢,采用型内感应加热工艺进行复合.造型时内层钢套预先放置在砂型中,复合时将包含有钢套的砂型整体放入到感应圈内采用中频感应原理对钢套进行预热,达到预定温度后浇注并继续进行加热,复合层将基体钢套包覆后停止加热.所得到的双金属复合铸件结合界面为完全冶金结合.复合层组织为连续分布FeAl3与Fe2Al5中间化合物.界面结合强度为76.4 MPa.
雙金屬複閤鑄件外層採用鑄造鋁閤金,內層選取碳素結構鋼,採用型內感應加熱工藝進行複閤.造型時內層鋼套預先放置在砂型中,複閤時將包含有鋼套的砂型整體放入到感應圈內採用中頻感應原理對鋼套進行預熱,達到預定溫度後澆註併繼續進行加熱,複閤層將基體鋼套包覆後停止加熱.所得到的雙金屬複閤鑄件結閤界麵為完全冶金結閤.複閤層組織為連續分佈FeAl3與Fe2Al5中間化閤物.界麵結閤彊度為76.4 MPa.
쌍금속복합주건외층채용주조려합금,내층선취탄소결구강,채용형내감응가열공예진행복합.조형시내층강투예선방치재사형중,복합시장포함유강투적사형정체방입도감응권내채용중빈감응원리대강투진행예열,체도예정온도후요주병계속진행가열,복합층장기체강투포복후정지가열.소득도적쌍금속복합주건결합계면위완전야금결합.복합층조직위련속분포FeAl3여Fe2Al5중간화합물.계면결합강도위76.4 MPa.