毛纺科技
毛紡科技
모방과기
WOOL TEXTILE JOURNAL
2012年
2期
43-46
,共4页
苎麻纤维%酸水解%水解率%影响因素
苧痳纖維%痠水解%水解率%影響因素
저마섬유%산수해%수해솔%영향인소
首先对苎麻纤维进行2种不同的预处理,然后用乙酸对预处理后的苎麻纤维水解,通过单因子实验和正交试验设计获得水解优化工艺.结果表明,苎麻纤维采用剪碎的预处理方式可提高水解率,水解时浴比的影响最大,其次为乙酸浓度、处理时间及温度,最佳工艺条件为:乙酸浓度30%、温度30℃、时间1h、浴比1∶60,此时水解率可达到25.55%.
首先對苧痳纖維進行2種不同的預處理,然後用乙痠對預處理後的苧痳纖維水解,通過單因子實驗和正交試驗設計穫得水解優化工藝.結果錶明,苧痳纖維採用剪碎的預處理方式可提高水解率,水解時浴比的影響最大,其次為乙痠濃度、處理時間及溫度,最佳工藝條件為:乙痠濃度30%、溫度30℃、時間1h、浴比1∶60,此時水解率可達到25.55%.
수선대저마섬유진행2충불동적예처리,연후용을산대예처리후적저마섬유수해,통과단인자실험화정교시험설계획득수해우화공예.결과표명,저마섬유채용전쇄적예처리방식가제고수해솔,수해시욕비적영향최대,기차위을산농도、처리시간급온도,최가공예조건위:을산농도30%、온도30℃、시간1h、욕비1∶60,차시수해솔가체도25.55%.