中国组织工程研究与临床康复
中國組織工程研究與臨床康複
중국조직공정연구여림상강복
JOURNAL OF CLINICAL REHABILITATIVE TISSUE ENGINEERING RESEARCH
2009年
21期
4185-4188
,共4页
齐京京%岳秀丽%王洋%刘绍琴%戴志飞
齊京京%嶽秀麗%王洋%劉紹琴%戴誌飛
제경경%악수려%왕양%류소금%대지비
脂质体%二氧化硅微球%盐酸阿霉素%长效给药
脂質體%二氧化硅微毬%鹽痠阿黴素%長效給藥
지질체%이양화규미구%염산아매소%장효급약
背景:脂质体药物载体近年来被用以增加药物的稳定性,提高药效,降低药物的毒副作用.然而研究发现由于稳定性较差,脂质体药物载体难以实现药物缓释与长效给药.大量研究表明,二氧化硅无毒,具有化学惰性和生物相容性,是很好的修饰材料.目的:为了提高脂质体药物载体的稳定性,延长给药时间,采用二氧化硅对脂质体进行表面修饰并用于抗癌药物盐酸阿霉素的包埋.设计、时间及地点:体外观察实验,于2007 05/2008-06在哈尔滨工业大学生物医学工程中心的纳米医药与生物传感器实验室完成.材料:L-α-二棕榈酰磷酯酰胆碱购自南京康森特化工有限公司,正硅酸乙酯购自美国Aldrich公司,盐酸阿霉素购自北京华奉联博科技有限公川,葡聚糖凝胶G-50购自瑞典Amersham公司,其他化学试剂均为分析纯.方法:通过溶胶-凝胶沉积二氧化硅的方法修饰模板L-α-二棕榈酰磷酯酰胆碱脂质体.主要观察指标:通过激光粒度仪与Zeta电位仪测定二氧化硅修饰后的脂质体粒径分布与表面电荷;通过透射电镜观察二氧化硅修饰后脂质体的形态;通过傅里叶变换红外光谱表征材料的化学结构;通过荧光光谱仪测定溶液中阿霉素浓度;通过阿霉素浓度回归方程计算脂质体药物包封率与脂质体体外释放速率.结果:①成功制备了二氧化硅包裹修饰的脂质体.②傅里叶变换红外光谱结果显示在1 166cm-1,1 080cm-1,859cm-1和526cm-1存在Si-O-Si振动峰.③二氧化硅修饰的脂质体对阿霉素的包封率为72.4%.④药物体外释放结果显示二氧化硅包裹修饰的脂质体使阿霉索达到缓释效果.结论:由于在脂质体的表面形成纳米级厚度的无机Si-O-Si网络作为保护层,使得脂质体的稳定性显著提高,并且对阿霉素有缓释效果.
揹景:脂質體藥物載體近年來被用以增加藥物的穩定性,提高藥效,降低藥物的毒副作用.然而研究髮現由于穩定性較差,脂質體藥物載體難以實現藥物緩釋與長效給藥.大量研究錶明,二氧化硅無毒,具有化學惰性和生物相容性,是很好的脩飾材料.目的:為瞭提高脂質體藥物載體的穩定性,延長給藥時間,採用二氧化硅對脂質體進行錶麵脩飾併用于抗癌藥物鹽痠阿黴素的包埋.設計、時間及地點:體外觀察實驗,于2007 05/2008-06在哈爾濱工業大學生物醫學工程中心的納米醫藥與生物傳感器實驗室完成.材料:L-α-二棕櫚酰燐酯酰膽堿購自南京康森特化工有限公司,正硅痠乙酯購自美國Aldrich公司,鹽痠阿黴素購自北京華奉聯博科技有限公川,葡聚糖凝膠G-50購自瑞典Amersham公司,其他化學試劑均為分析純.方法:通過溶膠-凝膠沉積二氧化硅的方法脩飾模闆L-α-二棕櫚酰燐酯酰膽堿脂質體.主要觀察指標:通過激光粒度儀與Zeta電位儀測定二氧化硅脩飾後的脂質體粒徑分佈與錶麵電荷;通過透射電鏡觀察二氧化硅脩飾後脂質體的形態;通過傅裏葉變換紅外光譜錶徵材料的化學結構;通過熒光光譜儀測定溶液中阿黴素濃度;通過阿黴素濃度迴歸方程計算脂質體藥物包封率與脂質體體外釋放速率.結果:①成功製備瞭二氧化硅包裹脩飾的脂質體.②傅裏葉變換紅外光譜結果顯示在1 166cm-1,1 080cm-1,859cm-1和526cm-1存在Si-O-Si振動峰.③二氧化硅脩飾的脂質體對阿黴素的包封率為72.4%.④藥物體外釋放結果顯示二氧化硅包裹脩飾的脂質體使阿黴索達到緩釋效果.結論:由于在脂質體的錶麵形成納米級厚度的無機Si-O-Si網絡作為保護層,使得脂質體的穩定性顯著提高,併且對阿黴素有緩釋效果.
배경:지질체약물재체근년래피용이증가약물적은정성,제고약효,강저약물적독부작용.연이연구발현유우은정성교차,지질체약물재체난이실현약물완석여장효급약.대량연구표명,이양화규무독,구유화학타성화생물상용성,시흔호적수식재료.목적:위료제고지질체약물재체적은정성,연장급약시간,채용이양화규대지질체진행표면수식병용우항암약물염산아매소적포매.설계、시간급지점:체외관찰실험,우2007 05/2008-06재합이빈공업대학생물의학공정중심적납미의약여생물전감기실험실완성.재료:L-α-이종려선린지선담감구자남경강삼특화공유한공사,정규산을지구자미국Aldrich공사,염산아매소구자북경화봉련박과기유한공천,포취당응효G-50구자서전Amersham공사,기타화학시제균위분석순.방법:통과용효-응효침적이양화규적방법수식모판L-α-이종려선린지선담감지질체.주요관찰지표:통과격광립도의여Zeta전위의측정이양화규수식후적지질체립경분포여표면전하;통과투사전경관찰이양화규수식후지질체적형태;통과부리협변환홍외광보표정재료적화학결구;통과형광광보의측정용액중아매소농도;통과아매소농도회귀방정계산지질체약물포봉솔여지질체체외석방속솔.결과:①성공제비료이양화규포과수식적지질체.②부리협변환홍외광보결과현시재1 166cm-1,1 080cm-1,859cm-1화526cm-1존재Si-O-Si진동봉.③이양화규수식적지질체대아매소적포봉솔위72.4%.④약물체외석방결과현시이양화규포과수식적지질체사아매색체도완석효과.결론:유우재지질체적표면형성납미급후도적무궤Si-O-Si망락작위보호층,사득지질체적은정성현저제고,병차대아매소유완석효과.
BACKGROUND: For decades, liposome drug carrier has been used to enhance drug stability and efficacy, reduce drug toxicity and adverse effects. However, they fail to provide long-term delivery due to insufficient stability. Studies have demonstrated that silica is not toxic, with chemically inert and biological compatibility, and can be used as modified material.
OBJECTIVE: To characterize the silica coated liposome and investigate the controlled release property.
DESIGN, TIME AND SETTING: In vitro observation. The study was performed at the Nanomedicine and Biosensor Laboratory, Biomedical Engineering Center, Harbin Institute of Technology from May 2007 to June 2008.
MATERIALS: Dipalmitoylphosphatidylcholine (DPPC) was purchased from Nanjing Kangsente Chemical Engineering Company; tetraethylorthosilicate (TEOS) was purchased from Aldrich, USA. Doxorubicin (DOX) was purchased from Beijing Huafeng United Technology Company; Sephadex G-50 was purchased from Amersham Biosciences, Sweden. All other chemical agents were of analytical purity.
METHODS: Liposome was formed from DPPC following the precipitation of silica by sol-gel method.
MAIN OUTCOME MEASURES: Zeta-potential and dynamic light scanning were used for zeta-potential measurement and particle size distribution; transmission electron microscopy was used to collect the image of particle morphology; Fourier transform infrared spectroscopy (FTIR) was used to display chemical characteristics of Si-O-Si structure; Spectrophotofluorimetry was used to determine DOX regression equation and was further used for calculation in drug encapsulation efficiency and in vitro release.
RESULTS: ①Silica coated liposome was successfully prepared. ②FTIR proofed the presence of Si-O-Si at 1 166, 1 080, 859 and 526 cm-1. ③The DOX encapsulated silica coated liposome had encapsulation efficiency of 72.4%. ④Drug release profiles showed that sustained release of DOX was achieved after modification of silica on liposome.
CONCLUSION: With Si-O-Si as protective layer, the liposome has increased stability and prolonged drug release.