CAJ | 학술논문

目前国内外对多自由度超声电机的研究和应用尚属探索阶段,出现了多种结构的多自由度超声电机.提出了一种新型单振子纵弯夹心换能器式超声电机结构,由单一驱动足产生多自由度振动轨迹,驱动球形转子作多自由度运动;对十字交叉换能器做了模态分析,对纵振和弯振做了模态简并;建立了驱动足的运动轨迹方程,并仿真分析了典型驱动方式下驱动足的振动轨迹;试验测试了样机转子绕X、Y、Z轴转动的速度与电压之间的关系和转矩与速度之间的关系,计算了相应情况下电机的最大效率;电机旋转方向与分析结果一致.
목전국내외대다자유도초성전궤적연구화응용상속탐색계단,출현료다충결구적다자유도초성전궤.제출료일충신형단진자종만협심환능기식초성전궤결구,유단일구동족산생다자유도진동궤적,구동구형전자작다자유도운동;대십자교차환능기주료모태분석,대종진화만진주료모태간병;건립료구동족적운동궤적방정,병방진분석료전형구동방식하구동족적진동궤적;시험측시료양궤전자요X、Y、Z축전동적속도여전압지간적관계화전구여속도지간적관계,계산료상응정황하전궤적최대효솔;전궤선전방향여분석결과일치.
Presently, study and application of a multi-DOF ultrasonic motor (USM) in the world are in investiga- ting stage, many structural types of multi-DOF USM occur. A multi-DOF USM based on a vibrator with single longitudi- nal-bending transducer was proposed and studied. The transducer brings the multi-DOF driving trajectories only with sin- gle tip. The tip drives a spherical spinner. Modal analysis was carried out for a cross orthogonal transducer with the FEM method, the longitudinal and bending resonance frequencies were degenerated. An analytical model of the multi-DOF driving foot trajectories was developed, the driving foot trajectories with typical driving forms were analyzed with numerical simulations. Relationships of rotary speed versus voltage and torque versus rotary speed around three coordinate axes were measured in tests, the corresponding efficiency was figured out. The experimental results were coincident with trajectories of analysis.