南昌大学学报(工科版)
南昌大學學報(工科版)
남창대학학보(공과판)
JOURNAL OF NANCHANG UNIVERSITY ENGINEERING & TECHNOLOGY EDITION
2012年
3期
253-257
,共5页
数值模拟%冷端位置优化%计算流体动力学(CFD)%半导体冷箱
數值模擬%冷耑位置優化%計算流體動力學(CFD)%半導體冷箱
수치모의%랭단위치우화%계산류체동역학(CFD)%반도체랭상
建立了三维稳态计算模型,应用CFD软件模拟计算1台半导体冷箱样机在运行稳定后工作空间的温度场.通过数值计算得到实验工况的温度场,并且通过实验测量冷箱工作空间内6个特定点的温度值,测点的计算值与实测值能够较好地吻合验证了计算模型的准确性.在冷端分别采用强迫风冷换热、自然对流换热方式条件下,模拟计算冷端布置于5个不同位置时冷箱工作空间的温度场,这5个位置分别是冷箱内后侧壁的1/4,1/2,3/4高度(同时,在与高度垂直的另一个方向上,位于尺寸中心处),左侧壁中心位置以及顶部中心位置处.通过对各种情况下温度分布图的对比分析,认为冷端无论采用强迫风冷换热还是自然对流换热方式,将冷端布置在顶部中心位置均可使得温度分布最佳,同时肯定了在冷端装设风扇的必要性.
建立瞭三維穩態計算模型,應用CFD軟件模擬計算1檯半導體冷箱樣機在運行穩定後工作空間的溫度場.通過數值計算得到實驗工況的溫度場,併且通過實驗測量冷箱工作空間內6箇特定點的溫度值,測點的計算值與實測值能夠較好地吻閤驗證瞭計算模型的準確性.在冷耑分彆採用彊迫風冷換熱、自然對流換熱方式條件下,模擬計算冷耑佈置于5箇不同位置時冷箱工作空間的溫度場,這5箇位置分彆是冷箱內後側壁的1/4,1/2,3/4高度(同時,在與高度垂直的另一箇方嚮上,位于呎吋中心處),左側壁中心位置以及頂部中心位置處.通過對各種情況下溫度分佈圖的對比分析,認為冷耑無論採用彊迫風冷換熱還是自然對流換熱方式,將冷耑佈置在頂部中心位置均可使得溫度分佈最佳,同時肯定瞭在冷耑裝設風扇的必要性.
건립료삼유은태계산모형,응용CFD연건모의계산1태반도체랭상양궤재운행은정후공작공간적온도장.통과수치계산득도실험공황적온도장,병차통과실험측량랭상공작공간내6개특정점적온도치,측점적계산치여실측치능구교호지문합험증료계산모형적준학성.재랭단분별채용강박풍랭환열、자연대류환열방식조건하,모의계산랭단포치우5개불동위치시랭상공작공간적온도장,저5개위치분별시랭상내후측벽적1/4,1/2,3/4고도(동시,재여고도수직적령일개방향상,위우척촌중심처),좌측벽중심위치이급정부중심위치처.통과대각충정황하온도분포도적대비분석,인위랭단무론채용강박풍랭환열환시자연대류환열방식,장랭단포치재정부중심위치균가사득온도분포최가,동시긍정료재랭단장설풍선적필요성.