公路工程
公路工程
공로공정
JOURNAL OF HIGHWAY ENGINEERING
2009年
2期
86-91
,共6页
杨艳群%卓曦%赖元文%王峰
楊豔群%卓晞%賴元文%王峰
양염군%탁희%뢰원문%왕봉
雾灯%控制%设计
霧燈%控製%設計
무등%공제%설계
为提高高速公路雾区段路侧雾灯的行车诱导能力,减少交通事故率,分析雾灯控制策略,从雾灯纵向、横向选址与安装高度等角度,研究雾灯工程设计理论,最后针对雾灯亮度与直径,建立雾灯选型计算方法.论文提出的分级雾灯控制策略、纵向间距计算方法、雾灯高度计算公式与直径模型等雾灯控制与设置技术,应用于龙长高速公路k69+202~k71+020雾区段,利用车速与道路线形指标计算,得出雾灯纵向间距为25~35 m,雾灯高度为120~130 cm,雾灯直径选用168 mm.结果表明,高速公路路侧雾灯控制与设置技术,为雾灯工程提供了定量计算方法,有助于提高雾灯工程的科学性与系统性.
為提高高速公路霧區段路側霧燈的行車誘導能力,減少交通事故率,分析霧燈控製策略,從霧燈縱嚮、橫嚮選阯與安裝高度等角度,研究霧燈工程設計理論,最後針對霧燈亮度與直徑,建立霧燈選型計算方法.論文提齣的分級霧燈控製策略、縱嚮間距計算方法、霧燈高度計算公式與直徑模型等霧燈控製與設置技術,應用于龍長高速公路k69+202~k71+020霧區段,利用車速與道路線形指標計算,得齣霧燈縱嚮間距為25~35 m,霧燈高度為120~130 cm,霧燈直徑選用168 mm.結果錶明,高速公路路側霧燈控製與設置技術,為霧燈工程提供瞭定量計算方法,有助于提高霧燈工程的科學性與繫統性.
위제고고속공로무구단로측무등적행차유도능력,감소교통사고솔,분석무등공제책략,종무등종향、횡향선지여안장고도등각도,연구무등공정설계이론,최후침대무등량도여직경,건립무등선형계산방법.논문제출적분급무등공제책략、종향간거계산방법、무등고도계산공식여직경모형등무등공제여설치기술,응용우룡장고속공로k69+202~k71+020무구단,이용차속여도로선형지표계산,득출무등종향간거위25~35 m,무등고도위120~130 cm,무등직경선용168 mm.결과표명,고속공로로측무등공제여설치기술,위무등공정제공료정량계산방법,유조우제고무등공정적과학성여계통성.