棉纺织技术
棉紡織技術
면방직기술
COTTON TEXTILE TECHNOLOGY
2009年
8期
44-46
,共3页
精梳纱%落棉率%环锭纺-工艺%棉结%牵伸分配
精梳紗%落棉率%環錠紡-工藝%棉結%牽伸分配
정소사%락면솔%배정방-공예%면결%견신분배
Combed Yarn%Waste Percentage%Ring Spinning Processing%Nep%Detaching and Joint Moment%Draft Distribution
为确保CJ 7.3 tex纱在精梳落棉率为9%时的成纱质量,合理选配原料,清梳工序减少纤维损伤、控制短绒产生,精梳工序采用前进给棉方式,并粗细工序合理牵伸分配,以提高成纱条干均匀度,络筒工序合理设置电清参数,使CJ 7.3 tex特细号纱质量达到使用要求.
為確保CJ 7.3 tex紗在精梳落棉率為9%時的成紗質量,閤理選配原料,清梳工序減少纖維損傷、控製短絨產生,精梳工序採用前進給棉方式,併粗細工序閤理牽伸分配,以提高成紗條榦均勻度,絡筒工序閤理設置電清參數,使CJ 7.3 tex特細號紗質量達到使用要求.
위학보CJ 7.3 tex사재정소락면솔위9%시적성사질량,합리선배원료,청소공서감소섬유손상、공제단융산생,정소공서채용전진급면방식,병조세공서합리견신분배,이제고성사조간균균도,락통공서합리설치전청삼수,사CJ 7.3 tex특세호사질량체도사용요구.
To make sure CJ 7.3 tex yarn quality in the condition of waste percentage 9% , raw material were select-ed rationally, fibre injury should be reduced and short fibre should be controlled well in picking and carding process, in combing process forward feed cotton were adopted, draft distribution should he set rationally in drawing, roving and spin-ning process to improve yarn evenness degree, electronic yarn cleaner parameter should be set properly in winding process,finally CJ 7.3 tex yarn quality could reach using demands.
