机械
機械
궤계
MACHINERY
2008年
12期
16-18
,共3页
袁昌耀%傅连东%王佳%刘龙园%陈忱
袁昌耀%傅連東%王佳%劉龍園%陳忱
원창요%부련동%왕가%류룡완%진침
流场%数值模拟%集成块%FLUENT
流場%數值模擬%集成塊%FLUENT
류장%수치모의%집성괴%FLUENT
针对工程中的液压集成块,应用前处理软件Gambit建立其内部流场的三维模型,采用FLUENT软件提供的k-ε湍流模型对不同结构管道流场进行了数值模拟.通过大量的仿真,分析了偏心距,工艺孔直径,和流向等参数对管道流场的影响.非正交方式连通时,必须根据输出输入管道直径关系选择合适的偏心距离,一般来说,r<(0.8min(d1,d2);工艺孔直径应当大于最小输入输出管道直径;在布局布孔条件允许的情况下,进油主流道应尽可能使用液流方向与刀尖角相对的结构形式进行两相交管路的连通,以减少刀尖角区域对下游流动所造成的能耗损失.依据仿真的结果对液压集成块进行了进一步的优化,优化后的集成块在实际工程应用中有很好的效果.
針對工程中的液壓集成塊,應用前處理軟件Gambit建立其內部流場的三維模型,採用FLUENT軟件提供的k-ε湍流模型對不同結構管道流場進行瞭數值模擬.通過大量的倣真,分析瞭偏心距,工藝孔直徑,和流嚮等參數對管道流場的影響.非正交方式連通時,必鬚根據輸齣輸入管道直徑關繫選擇閤適的偏心距離,一般來說,r<(0.8min(d1,d2);工藝孔直徑應噹大于最小輸入輸齣管道直徑;在佈跼佈孔條件允許的情況下,進油主流道應儘可能使用液流方嚮與刀尖角相對的結構形式進行兩相交管路的連通,以減少刀尖角區域對下遊流動所造成的能耗損失.依據倣真的結果對液壓集成塊進行瞭進一步的優化,優化後的集成塊在實際工程應用中有很好的效果.
침대공정중적액압집성괴,응용전처리연건Gambit건립기내부류장적삼유모형,채용FLUENT연건제공적k-ε단류모형대불동결구관도류장진행료수치모의.통과대량적방진,분석료편심거,공예공직경,화류향등삼수대관도류장적영향.비정교방식련통시,필수근거수출수입관도직경관계선택합괄적편심거리,일반래설,r<(0.8min(d1,d2);공예공직경응당대우최소수입수출관도직경;재포국포공조건윤허적정황하,진유주류도응진가능사용액류방향여도첨각상대적결구형식진행량상교관로적련통,이감소도첨각구역대하유류동소조성적능모손실.의거방진적결과대액압집성괴진행료진일보적우화,우화후적집성괴재실제공정응용중유흔호적효과.