热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2012年
20期
20-22
,共3页
张晓菲%彭成章%肖阳%朱金水
張曉菲%彭成章%肖暘%硃金水
장효비%팽성장%초양%주금수
镍铝青铜合金%热变形%流变应力%本构方程
鎳鋁青銅閤金%熱變形%流變應力%本構方程
얼려청동합금%열변형%류변응력%본구방정
利用Gleeble-1500型热力模拟机,研究镍铝青铜合金在变形温度800~950℃、应变速率0.002~5 s-1时的热变形行为.根据热压缩试验数据,绘制了不同变形条件下的镍铝青铜合金真应力-真应变曲线,通过线性回归建立了镍铝青铜合金热变形本构方程.结果表明,流变应力随变形温度的升高而降低,随应变速率的提高而增大;计算得出的平均变形激活能为313.03 kJ/mol.
利用Gleeble-1500型熱力模擬機,研究鎳鋁青銅閤金在變形溫度800~950℃、應變速率0.002~5 s-1時的熱變形行為.根據熱壓縮試驗數據,繪製瞭不同變形條件下的鎳鋁青銅閤金真應力-真應變麯線,通過線性迴歸建立瞭鎳鋁青銅閤金熱變形本構方程.結果錶明,流變應力隨變形溫度的升高而降低,隨應變速率的提高而增大;計算得齣的平均變形激活能為313.03 kJ/mol.
이용Gleeble-1500형열력모의궤,연구얼려청동합금재변형온도800~950℃、응변속솔0.002~5 s-1시적열변형행위.근거열압축시험수거,회제료불동변형조건하적얼려청동합금진응력-진응변곡선,통과선성회귀건립료얼려청동합금열변형본구방정.결과표명,류변응력수변형온도적승고이강저,수응변속솔적제고이증대;계산득출적평균변형격활능위313.03 kJ/mol.