材料科学与工艺
材料科學與工藝
재료과학여공예
MATERIAL SCIENCE AND TECHNOLOGY
2004年
4期
342-344,348
,共4页
彭群%李荣洪%郑鹏飞%赵彦启%陆辛
彭群%李榮洪%鄭鵬飛%趙彥啟%陸辛
팽군%리영홍%정붕비%조언계%륙신
厚板精冲%往复成形精冲%塑性加工%厚度限制%数值模拟
厚闆精遲%往複成形精遲%塑性加工%厚度限製%數值模擬
후판정충%왕복성형정충%소성가공%후도한제%수치모의
在吸取强力压边精冲、对向凹模精冲、振动修边和往复冲裁等金属塑性加工工艺特点的基础上,首次提出了往复成形精冲--一种新型的厚板精冲工艺方法,以突破传统精冲技术对加工材料的厚度限制.先用数值模拟的方法对新工艺进行了研究,然后研制了用于实现新工艺的模具,该模具由两个凹模,两个凸模组成,其动作比强力压边精冲更复杂.研究表明,新工艺与传统工艺相比,能够加工更厚的材料,利用新工艺,项目组通过实验获得了直径为Ф30 mm,厚度为12 mm的合格圆形35#钢精冲件.新工艺突破了传统精冲工艺对材料厚度的限制,将大大拓展精冲技术的应用范围.
在吸取彊力壓邊精遲、對嚮凹模精遲、振動脩邊和往複遲裁等金屬塑性加工工藝特點的基礎上,首次提齣瞭往複成形精遲--一種新型的厚闆精遲工藝方法,以突破傳統精遲技術對加工材料的厚度限製.先用數值模擬的方法對新工藝進行瞭研究,然後研製瞭用于實現新工藝的模具,該模具由兩箇凹模,兩箇凸模組成,其動作比彊力壓邊精遲更複雜.研究錶明,新工藝與傳統工藝相比,能夠加工更厚的材料,利用新工藝,項目組通過實驗穫得瞭直徑為Ф30 mm,厚度為12 mm的閤格圓形35#鋼精遲件.新工藝突破瞭傳統精遲工藝對材料厚度的限製,將大大拓展精遲技術的應用範圍.
재흡취강력압변정충、대향요모정충、진동수변화왕복충재등금속소성가공공예특점적기출상,수차제출료왕복성형정충--일충신형적후판정충공예방법,이돌파전통정충기술대가공재료적후도한제.선용수치모의적방법대신공예진행료연구,연후연제료용우실현신공예적모구,해모구유량개요모,량개철모조성,기동작비강력압변정충경복잡.연구표명,신공예여전통공예상비,능구가공경후적재료,이용신공예,항목조통과실험획득료직경위Ф30 mm,후도위12 mm적합격원형35#강정충건.신공예돌파료전통정충공예대재료후도적한제,장대대탁전정충기술적응용범위.