CAJ | 학술논문

在空间电压矢量图区域划分的基础上,提出一种基于矢量分区概念的三电平SVPWM零序分量分析方法.深入研究了不同工作状态下的零序分量特点,研究结果表明对三电平SVPWM选择适当的冗余电压矢量可以通过对三角载波型PWM叠加适当的零序分量等效实现,同时所提出的零序分量分析方法直观有效,物理意义清晰,便于对零序分量的理解和运用.仿真和实验结果表明文中给出分析方法的正确性.
재공간전압시량도구역화분적기출상,제출일충기우시량분구개념적삼전평SVPWM령서분량분석방법.심입연구료불동공작상태하적령서분량특점,연구결과표명대삼전평SVPWM선택괄당적용여전압시량가이통과대삼각재파형PWM첩가괄당적령서분량등효실현,동시소제출적령서분량분석방법직관유효,물리의의청석,편우대령서분량적리해화운용.방진화실험결과표명문중급출분석방법적정학성.
This paper proposes a novel method for analyzing the zero-sequence signal of three-level voltage-source inverter based on vector diagram partition. The inherent relation between carried-based PWM and SVPWM is demonstrated. It is shown that the two method can work equivalently through proper selection of active time for the redundant vector in the case of space vector modulation, or zero-sequence signal injections in the case of carried-based modulation. Both simulation and experimental results verify the effectiveness of proposed approach.