材料与冶金学报
材料與冶金學報
재료여야금학보
JOURNAL OF MATERIALS AND METALLURGY
2005年
2期
111-114,119
,共5页
刘冬艳%张海峰%邓胜涛%胡壮麒
劉鼕豔%張海峰%鄧勝濤%鬍壯麒
류동염%장해봉%산성도%호장기
bulk metallic glasses%glass forming ability%thermal stability%copper mould casting
The bulk Fe60CoxZr10Mo5W2B23-x (x= 1, 3, 5, 7, 9) amorphous rods with diameters of1.5 mm were successfully prepared by copper mold casting method with the low purity raw materials.The amorphous and crystalline states, and thermal parameters, such as the glass transition temperature (Tg), the initial crystallization temperature (Tx), the supercooled liquid region (ΔTx = TxTg), the reduced glass transition temperature Trg (Tg/Tm, Tm: the onset temperature of melting of the alloy, and Tg/T1, T1 : the finished temperature of melting of the alloy) were investigated by X-ray diffractometry (XRD) and differential scanning calorimetry (DSC) analysis. Glass forming ability of Fe60CoxZr10Mo5W2B23-x (x=1, 3, 5, 7, 9)bulk metallic glasses has been studied. According to the results, the alloy (x=7) with the highest Trg (Tg/T1 =0. 607, Tg/T1 =0.590) value, has the strongest glass forming ability among these alloys because its composition is near eutectic composition.The wide supercooled liquid region over 72 K indicates the high thermal stability for this alloy system.This bulk metallic glass exhibits quite high strength (Hv 1020). The success of production of the Febased bulk metallic glass with industrial materials is of great significance for the future progress of basic research and practical application.