CAJ | 학술논문

对用于轧辊堆焊的药芯埋弧焊丝W110熔敷金属进行了焊接热模拟研究.通过焊接热模拟试验、硬度测试、微观分析等手段对W110焊丝熔敷金属在七种焊接热循环条件下得到的组织和性能进行了研究.研究表明,该焊丝熔敷金属的Ms点在260～280℃;用W110焊接时的预热温度可选用280～300℃,层问温度应不低于260℃,回火温度应避开450～550℃.
대용우알곤퇴한적약심매호한사W110용부금속진행료한접열모의연구.통과한접열모의시험、경도측시、미관분석등수단대W110한사용부금속재칠충한접열순배조건하득도적조직화성능진행료연구.연구표명,해한사용부금속적Ms점재260～280℃;용W110한접시적예열온도가선용280～300℃,층문온도응불저우260℃,회화온도응피개450～550℃.
The deposited metal of flux cored submerged welding wire W110 used for rollers building up was investigated by welding thermal simulation.By means of welding thermal simulation experiment,hardness testing,and micro-analysis,the sffuctttre and properties of the deposited metal were analyzed at different welding thermal cycles.The results show that the Ms point of W110-deposited metal is 260～280℃,the preheating temperature of W110-wire is 280～300℃ and the intedayer temperature should be higher than 260℃ during welding,and temperature should be not at 450～550℃.