湿法冶金
濕法冶金
습법야금
HYDROMETALLURGY OF CHINA
2010年
2期
120-122
,共3页
铅烟灰%双氧水%碱浸出%氧化锌%制备
鉛煙灰%雙氧水%堿浸齣%氧化鋅%製備
연연회%쌍양수%감침출%양화자%제비
研究了用含锌铅烟灰,通过碱浸制备氧化锌.含锌铅烟灰在25 ℃下,用3%双氧水预处理,再用5 mol/L氢氧化钠溶液在85 ℃下浸出1.5 h,浸出液降温过滤后干燥、煅烧,得到符合直接法一级品标准的ZnO粉末.试验结果表明:锌浸出率达97%左右,浸出渣中锌质量分数在4%以下,铅质量分数为45%,As质量分数0.01%左右.
研究瞭用含鋅鉛煙灰,通過堿浸製備氧化鋅.含鋅鉛煙灰在25 ℃下,用3%雙氧水預處理,再用5 mol/L氫氧化鈉溶液在85 ℃下浸齣1.5 h,浸齣液降溫過濾後榦燥、煅燒,得到符閤直接法一級品標準的ZnO粉末.試驗結果錶明:鋅浸齣率達97%左右,浸齣渣中鋅質量分數在4%以下,鉛質量分數為45%,As質量分數0.01%左右.
연구료용함자연연회,통과감침제비양화자.함자연연회재25 ℃하,용3%쌍양수예처리,재용5 mol/L경양화납용액재85 ℃하침출1.5 h,침출액강온과려후간조、단소,득도부합직접법일급품표준적ZnO분말.시험결과표명:자침출솔체97%좌우,침출사중자질량분수재4%이하,연질량분수위45%,As질량분수0.01%좌우.