热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2009年
18期
61-63,67
,共4页
刘少平%揭小平%闫洪%胡志
劉少平%揭小平%閆洪%鬍誌
류소평%게소평%염홍%호지
高能超声法%镁基复合材料%SiC_P
高能超聲法%鎂基複閤材料%SiC_P
고능초성법%미기복합재료%SiC_P
high energy ultrasound%Mg based composites%SiC particles
采用高能超声法制备SiC_P增强AZ61镁基复合材料.结果表明,高能超声能够使纳米级陶瓷颗粒在镁合金熔体中有效分散,所制备的复合材料抗拉强度和屈服强度等力学性能比基体有所提高.其中所用SiC颗粒粒径为100 mm、5μm和20μm,在1%的添加量下复合材料可以获得较好的性能,其抗拉强度分别为321、276和260 MPa,伸长率分别为13.8%、12.6%和10.6%.
採用高能超聲法製備SiC_P增彊AZ61鎂基複閤材料.結果錶明,高能超聲能夠使納米級陶瓷顆粒在鎂閤金鎔體中有效分散,所製備的複閤材料抗拉彊度和屈服彊度等力學性能比基體有所提高.其中所用SiC顆粒粒徑為100 mm、5μm和20μm,在1%的添加量下複閤材料可以穫得較好的性能,其抗拉彊度分彆為321、276和260 MPa,伸長率分彆為13.8%、12.6%和10.6%.
채용고능초성법제비SiC_P증강AZ61미기복합재료.결과표명,고능초성능구사납미급도자과립재미합금용체중유효분산,소제비적복합재료항랍강도화굴복강도등역학성능비기체유소제고.기중소용SiC과립립경위100 mm、5μm화20μm,재1%적첨가량하복합재료가이획득교호적성능,기항랍강도분별위321、276화260 MPa,신장솔분별위13.8%、12.6%화10.6%.
The use of high-energy ultrasound to prepare SiC particulate reinforced AZ61 Mg-based composites was conducted. The results show that high-energy ultrasound can make nano-ceramic particles effectively dispersed in the magnesium alloy melt. The tensile strength and yield strength increase compared with the Mg based. The particle sizes of the SiC are 100 nm, 5 μm and 20 μm, respectively. The composite materials adding 1%SiC can get better performance. Their tensile strength are respectively 321,276 and 206 MPa, elongations are 13.8%, 13.6% and 10.6%.