西安交通大学学报
西安交通大學學報
서안교통대학학보
JOURNAL OF XI'AN JIAOTONG UNIVERSITY
2010年
9期
82-86,127
,共6页
2D阀%偏置控制%振动波形
2D閥%偏置控製%振動波形
2D벌%편치공제%진동파형
为实现对液压缸活塞杆振动中心平衡位置偏置量的精确控制,提出2D阀与电液数字阀并联机构的新方案.在产生相同流量平均值的条件下,将并联机构等效为正开口滑阀,求解出振动中心的平衡位置,然后将并联数字阀等效为恒定负载,推导出偏置控制下振动波形的解析解.在5~200 Hz范围内进行振动疲劳试验,试验结果表明:当2D阀阀开口一定时,并联数字阀阀口与活塞杆振动中心平衡位置点成线性关系,但偏置量不会大于最大振幅,振动波形类似正弦波;当并联数字阀阀口一定时,随2D阀阀口面积系数的增大,偏置的平衡位置点减小,振动的最大位置点呈先减小再增大的规律;当振动频率为200 Hz、并联数字阀开口面积占最大并联阀阀口面积的25%时,振动的最大位置点在2D阀阀口面积的20%处最小.这一并联机构不仅能提高频响,保证电液激振器工作频率和激振幅值的分别控制,而且能够实现偏载量的独立、精确控制.
為實現對液壓缸活塞桿振動中心平衡位置偏置量的精確控製,提齣2D閥與電液數字閥併聯機構的新方案.在產生相同流量平均值的條件下,將併聯機構等效為正開口滑閥,求解齣振動中心的平衡位置,然後將併聯數字閥等效為恆定負載,推導齣偏置控製下振動波形的解析解.在5~200 Hz範圍內進行振動疲勞試驗,試驗結果錶明:噹2D閥閥開口一定時,併聯數字閥閥口與活塞桿振動中心平衡位置點成線性關繫,但偏置量不會大于最大振幅,振動波形類似正絃波;噹併聯數字閥閥口一定時,隨2D閥閥口麵積繫數的增大,偏置的平衡位置點減小,振動的最大位置點呈先減小再增大的規律;噹振動頻率為200 Hz、併聯數字閥開口麵積佔最大併聯閥閥口麵積的25%時,振動的最大位置點在2D閥閥口麵積的20%處最小.這一併聯機構不僅能提高頻響,保證電液激振器工作頻率和激振幅值的分彆控製,而且能夠實現偏載量的獨立、精確控製.
위실현대액압항활새간진동중심평형위치편치량적정학공제,제출2D벌여전액수자벌병련궤구적신방안.재산생상동류량평균치적조건하,장병련궤구등효위정개구활벌,구해출진동중심적평형위치,연후장병련수자벌등효위항정부재,추도출편치공제하진동파형적해석해.재5~200 Hz범위내진행진동피로시험,시험결과표명:당2D벌벌개구일정시,병련수자벌벌구여활새간진동중심평형위치점성선성관계,단편치량불회대우최대진폭,진동파형유사정현파;당병련수자벌벌구일정시,수2D벌벌구면적계수적증대,편치적평형위치점감소,진동적최대위치점정선감소재증대적규률;당진동빈솔위200 Hz、병련수자벌개구면적점최대병련벌벌구면적적25%시,진동적최대위치점재2D벌벌구면적적20%처최소.저일병련궤구불부능제고빈향,보증전액격진기공작빈솔화격진폭치적분별공제,이차능구실현편재량적독립、정학공제.