机械工程学报
機械工程學報
궤계공정학보
CHINESE JOURNAL OF MECHANICAL ENGINEERING
2010年
12期
48-52
,共5页
郑磊%焦少阳%董建新%张麦仓
鄭磊%焦少暘%董建新%張麥倉
정뢰%초소양%동건신%장맥창
镍基高温合金%等温热处理%贫铬区%微观组织
鎳基高溫閤金%等溫熱處理%貧鉻區%微觀組織
얼기고온합금%등온열처리%빈락구%미관조직
应用透射电子显微镜研究690合金固溶处理(1 020℃/15 min)后在不同温度(650℃,715℃,800℃)和不同时间(1~40 h)等温热处理的晶界碳化物析出行为和贫铬区演化状况,总结热处理工艺参数对碳化物和贫铬区的影响,指出贫Cr区是由碳化物的析出长大行为与原子迁移共同作用的结果,并从微观组织变化角度确定最佳的热处理制度.研究结果表明,800℃等温热处理时碳化物在晶界两侧同时析出:715℃/10~20 h时晶界附近铬分布最为平缓.690合金最佳等温热处理制度为715℃/10~20 h.
應用透射電子顯微鏡研究690閤金固溶處理(1 020℃/15 min)後在不同溫度(650℃,715℃,800℃)和不同時間(1~40 h)等溫熱處理的晶界碳化物析齣行為和貧鉻區縯化狀況,總結熱處理工藝參數對碳化物和貧鉻區的影響,指齣貧Cr區是由碳化物的析齣長大行為與原子遷移共同作用的結果,併從微觀組織變化角度確定最佳的熱處理製度.研究結果錶明,800℃等溫熱處理時碳化物在晶界兩側同時析齣:715℃/10~20 h時晶界附近鉻分佈最為平緩.690閤金最佳等溫熱處理製度為715℃/10~20 h.
응용투사전자현미경연구690합금고용처리(1 020℃/15 min)후재불동온도(650℃,715℃,800℃)화불동시간(1~40 h)등온열처리적정계탄화물석출행위화빈락구연화상황,총결열처리공예삼수대탄화물화빈락구적영향,지출빈Cr구시유탄화물적석출장대행위여원자천이공동작용적결과,병종미관조직변화각도학정최가적열처리제도.연구결과표명,800℃등온열처리시탄화물재정계량측동시석출:715℃/10~20 h시정계부근락분포최위평완.690합금최가등온열처리제도위715℃/10~20 h.