材料科学与工艺
材料科學與工藝
재료과학여공예
MATERIAL SCIENCE AND TECHNOLOGY
2005年
6期
579-581,585
,共4页
再生骨料%破碎%整形%粒形%性能
再生骨料%破碎%整形%粒形%性能
재생골료%파쇄%정형%립형%성능
为了有效提高再生粗骨料的性能,必须对再生骨料进行机械强化处理.首次提出了利用高速(线速度≥80m/s)运动的再生骨料之间的反复相互冲击与摩擦作用,有效地打掉较为突出的棱角和除去颗粒表面附着的砂浆和水泥石的一种新技术.研究表明:颗粒整形使再生骨料的颗粒堆积密度平均提高了9.3%、表观密度从2.56g/cm3提高到2.59g/cm3、空隙率从53.3%降至48.5%、吸水率从4.7%降至2.9%、压碎指标值从15.8%降至9.4%,而且堆积密度、密实密度和针片状骨料含量等指标均优于天然碎石骨料,完全能够满足配制普通混凝土的要求.
為瞭有效提高再生粗骨料的性能,必鬚對再生骨料進行機械彊化處理.首次提齣瞭利用高速(線速度≥80m/s)運動的再生骨料之間的反複相互遲擊與摩抆作用,有效地打掉較為突齣的稜角和除去顆粒錶麵附著的砂漿和水泥石的一種新技術.研究錶明:顆粒整形使再生骨料的顆粒堆積密度平均提高瞭9.3%、錶觀密度從2.56g/cm3提高到2.59g/cm3、空隙率從53.3%降至48.5%、吸水率從4.7%降至2.9%、壓碎指標值從15.8%降至9.4%,而且堆積密度、密實密度和針片狀骨料含量等指標均優于天然碎石骨料,完全能夠滿足配製普通混凝土的要求.
위료유효제고재생조골료적성능,필수대재생골료진행궤계강화처리.수차제출료이용고속(선속도≥80m/s)운동적재생골료지간적반복상호충격여마찰작용,유효지타도교위돌출적릉각화제거과립표면부착적사장화수니석적일충신기술.연구표명:과립정형사재생골료적과립퇴적밀도평균제고료9.3%、표관밀도종2.56g/cm3제고도2.59g/cm3、공극솔종53.3%강지48.5%、흡수솔종4.7%강지2.9%、압쇄지표치종15.8%강지9.4%,이차퇴적밀도、밀실밀도화침편상골료함량등지표균우우천연쇄석골료,완전능구만족배제보통혼응토적요구.