机械工程学报
機械工程學報
궤계공정학보
CHINESE JOURNAL OF MECHANICAL ENGINEERING
2011年
4期
42-46
,共5页
韩永全%许萍%杜茂华%吴永军%姚金难
韓永全%許萍%杜茂華%吳永軍%姚金難
한영전%허평%두무화%오영군%요금난
等离子弧焊接%电弧力%电弧形态%双弧
等離子弧銲接%電弧力%電弧形態%雙弧
등리자호한접%전호력%전호형태%쌍호
等离子电弧由于受机械压缩、热压缩和电磁压缩三种压缩效应,电位梯度高,当焊接参数不当时易出现双弧.在铝合金变极性等离子弧焊接反极性期间由于电弧相对正极性期间电弧发散,更易出现双弧.焊接电流与离子气流量的合理匹配、喷嘴孔径与电极内缩量的配合以及变极性等离子弧焊接电源结构等是影响变极性等离子弧双弧的主要因素.通过改进焊接电源的结构及控制方法,即在维弧电源主回路上串接MOSFET管,通过MOSFET管的开通与关断来实现对维弧电源主回路的通断控制,从而避免了铝合金变极性等离子弧焊接反极性期间维弧电源分流形成双弧.通过合理选择焊接参数有效解决了铝合金变极性等离子弧焊接时的双弧现象,在厚板铝合金变极性等离子弧焊接中获得了理想的焊接质量.
等離子電弧由于受機械壓縮、熱壓縮和電磁壓縮三種壓縮效應,電位梯度高,噹銲接參數不噹時易齣現雙弧.在鋁閤金變極性等離子弧銲接反極性期間由于電弧相對正極性期間電弧髮散,更易齣現雙弧.銲接電流與離子氣流量的閤理匹配、噴嘴孔徑與電極內縮量的配閤以及變極性等離子弧銲接電源結構等是影響變極性等離子弧雙弧的主要因素.通過改進銲接電源的結構及控製方法,即在維弧電源主迴路上串接MOSFET管,通過MOSFET管的開通與關斷來實現對維弧電源主迴路的通斷控製,從而避免瞭鋁閤金變極性等離子弧銲接反極性期間維弧電源分流形成雙弧.通過閤理選擇銲接參數有效解決瞭鋁閤金變極性等離子弧銲接時的雙弧現象,在厚闆鋁閤金變極性等離子弧銲接中穫得瞭理想的銲接質量.
등리자전호유우수궤계압축、열압축화전자압축삼충압축효응,전위제도고,당한접삼수불당시역출현쌍호.재려합금변겁성등리자호한접반겁성기간유우전호상대정겁성기간전호발산,경역출현쌍호.한접전류여리자기류량적합리필배、분취공경여전겁내축량적배합이급변겁성등리자호한접전원결구등시영향변겁성등리자호쌍호적주요인소.통과개진한접전원적결구급공제방법,즉재유호전원주회로상천접MOSFET관,통과MOSFET관적개통여관단래실현대유호전원주회로적통단공제,종이피면료려합금변겁성등리자호한접반겁성기간유호전원분류형성쌍호.통과합리선택한접삼수유효해결료려합금변겁성등리자호한접시적쌍호현상,재후판려합금변겁성등리자호한접중획득료이상적한접질량.