光学精密工程
光學精密工程
광학정밀공정
OPTICS AND PRECISION ENGINEERING
2011年
4期
768-774
,共7页
寇淑清%王金伟%郑祺峰%杨慎华
寇淑清%王金偉%鄭祺峰%楊慎華
구숙청%왕금위%정기봉%양신화
韧/脆性材料%裂解槽%脉冲激光%显微组织%脆性断裂
韌/脆性材料%裂解槽%脈遲激光%顯微組織%脆性斷裂
인/취성재료%렬해조%맥충격광%현미조직%취성단렬
采用Nd:YAG脉冲激光对连杆所用材料C70S6钢和发动机曲轴轴承座常用材料灰铸铁进行了裂解槽加工,并在裂解设备上进行了胀断实验.采用工具显微镜、扫描电子显微镜和显微硬度仪等对比研究了裂解槽的几何形貌、裂解槽附近显微组织和显微硬度变化以及断口形貌,探讨了脉冲激光加工裂解槽的特性,揭示了脉冲激光加工韧/脆性材料裂解槽对胀断工艺的影响机制.结果表明:脉冲激光加工韧/脆性材料裂解槽的几何形貌、缺口效应均明显优于拉削加工和线切割加工,其中灰铸铁的缺口敏感性得到显著增强,在韧/脆性材料裂解槽附近均生成了易碎的马氏体,在槽的根部出现了微裂纹,组织明显细化;韧/脆性材料熔化区显微硬度约为820/850 HV,相变硬化区约为860/550 HV,显微硬度均高于基体,硬化效果显著;在C70S6钢槽根部区域未见韧性撕裂现象,韧/脆性材料断口都表现出脆性断裂特征,满足裂解工艺要求.
採用Nd:YAG脈遲激光對連桿所用材料C70S6鋼和髮動機麯軸軸承座常用材料灰鑄鐵進行瞭裂解槽加工,併在裂解設備上進行瞭脹斷實驗.採用工具顯微鏡、掃描電子顯微鏡和顯微硬度儀等對比研究瞭裂解槽的幾何形貌、裂解槽附近顯微組織和顯微硬度變化以及斷口形貌,探討瞭脈遲激光加工裂解槽的特性,揭示瞭脈遲激光加工韌/脆性材料裂解槽對脹斷工藝的影響機製.結果錶明:脈遲激光加工韌/脆性材料裂解槽的幾何形貌、缺口效應均明顯優于拉削加工和線切割加工,其中灰鑄鐵的缺口敏感性得到顯著增彊,在韌/脆性材料裂解槽附近均生成瞭易碎的馬氏體,在槽的根部齣現瞭微裂紋,組織明顯細化;韌/脆性材料鎔化區顯微硬度約為820/850 HV,相變硬化區約為860/550 HV,顯微硬度均高于基體,硬化效果顯著;在C70S6鋼槽根部區域未見韌性撕裂現象,韌/脆性材料斷口都錶現齣脆性斷裂特徵,滿足裂解工藝要求.
채용Nd:YAG맥충격광대련간소용재료C70S6강화발동궤곡축축승좌상용재료회주철진행료렬해조가공,병재렬해설비상진행료창단실험.채용공구현미경、소묘전자현미경화현미경도의등대비연구료렬해조적궤하형모、렬해조부근현미조직화현미경도변화이급단구형모,탐토료맥충격광가공렬해조적특성,게시료맥충격광가공인/취성재료렬해조대창단공예적영향궤제.결과표명:맥충격광가공인/취성재료렬해조적궤하형모、결구효응균명현우우랍삭가공화선절할가공,기중회주철적결구민감성득도현저증강,재인/취성재료렬해조부근균생성료역쇄적마씨체,재조적근부출현료미렬문,조직명현세화;인/취성재료용화구현미경도약위820/850 HV,상변경화구약위860/550 HV,현미경도균고우기체,경화효과현저;재C70S6강조근부구역미견인성시렬현상,인/취성재료단구도표현출취성단렬특정,만족렬해공예요구.