含能材料
含能材料
함능재료
ENERGETIC MATERIALS
2008年
4期
415-419
,共5页
张会锁%赵捍东%黄延平%石兴玉%张燕欣
張會鎖%趙捍東%黃延平%石興玉%張燕訢
장회쇄%조한동%황연평%석흥옥%장연흔
弹药爆轰理论与工程%起爆方式%射流%数值模拟%聚能装药
彈藥爆轟理論與工程%起爆方式%射流%數值模擬%聚能裝藥
탄약폭굉이론여공정%기폭방식%사류%수치모의%취능장약
应用ANSYS/LS-DYNA3D有限元分析软件,采用ALE算法对在同种装药结构条件下的药型罩顶部单点起爆、顶面双环线起爆、装药面轴向外壁中心单环线起爆、三环线起爆后形成的聚能射流分别进行了数值模拟.计算结果表明,起爆方式对射流性能有着重要的影响,不同起爆方式在装药中形成不同的爆轰波形,药型罩顶部双环线起爆比单点起爆后形成的射流头部速度提高11.6%; 装药面轴向外壁线起爆比药型罩顶部任何方式起爆后形成的聚能射流头部速度都低,装药面轴向外壁三环线起爆比药型罩顶部双环线起爆后形成的射流头部速度降低18%; 同时进行了验证实验,仿真结果与实验结果吻合.
應用ANSYS/LS-DYNA3D有限元分析軟件,採用ALE算法對在同種裝藥結構條件下的藥型罩頂部單點起爆、頂麵雙環線起爆、裝藥麵軸嚮外壁中心單環線起爆、三環線起爆後形成的聚能射流分彆進行瞭數值模擬.計算結果錶明,起爆方式對射流性能有著重要的影響,不同起爆方式在裝藥中形成不同的爆轟波形,藥型罩頂部雙環線起爆比單點起爆後形成的射流頭部速度提高11.6%; 裝藥麵軸嚮外壁線起爆比藥型罩頂部任何方式起爆後形成的聚能射流頭部速度都低,裝藥麵軸嚮外壁三環線起爆比藥型罩頂部雙環線起爆後形成的射流頭部速度降低18%; 同時進行瞭驗證實驗,倣真結果與實驗結果吻閤.
응용ANSYS/LS-DYNA3D유한원분석연건,채용ALE산법대재동충장약결구조건하적약형조정부단점기폭、정면쌍배선기폭、장약면축향외벽중심단배선기폭、삼배선기폭후형성적취능사류분별진행료수치모의.계산결과표명,기폭방식대사류성능유착중요적영향,불동기폭방식재장약중형성불동적폭굉파형,약형조정부쌍배선기폭비단점기폭후형성적사류두부속도제고11.6%; 장약면축향외벽선기폭비약형조정부임하방식기폭후형성적취능사류두부속도도저,장약면축향외벽삼배선기폭비약형조정부쌍배선기폭후형성적사류두부속도강저18%; 동시진행료험증실험,방진결과여실험결과문합.