河北大学学报(自然科学版)
河北大學學報(自然科學版)
하북대학학보(자연과학판)
JOURNAL OF HEBEI UNIVERSITY(NATURAL SCIENCE EDITION)
2012年
2期
198-202
,共5页
田晓%耿建%马力辉%牛建刚%马凯
田曉%耿建%馬力輝%牛建剛%馬凱
전효%경건%마력휘%우건강%마개
义齿材料%自凝%热凝%摩擦%磨损
義齒材料%自凝%熱凝%摩抆%磨損
의치재료%자응%열응%마찰%마손
在自制的往复摩擦磨损实验台上,以球面接触方式,在干摩擦、法向压力为20 N、往复频率为0.5 Hz、摆幅85 mm条件下,研究了牙科用的自凝和热凝树脂球分别对自凝树脂板的摩擦磨损行为.实验过程中利用动态应变仪测量摩擦过程中应变片的应变,进而计算出摩擦系数.结合电镜观察比较得出了自凝与热凝2种义齿材料的耐磨性能:自凝树脂义齿材料磨损过程中会出现材料塑性流动和表面致密的光滑层,磨损轻微,后者材料致密性差有气孔,磨损过程中出现层状磨损,气孔周围材料易脱落,结果自凝材料的摩擦系数低于热凝材料,且耐磨性高于热凝材料.
在自製的往複摩抆磨損實驗檯上,以毬麵接觸方式,在榦摩抆、法嚮壓力為20 N、往複頻率為0.5 Hz、襬幅85 mm條件下,研究瞭牙科用的自凝和熱凝樹脂毬分彆對自凝樹脂闆的摩抆磨損行為.實驗過程中利用動態應變儀測量摩抆過程中應變片的應變,進而計算齣摩抆繫數.結閤電鏡觀察比較得齣瞭自凝與熱凝2種義齒材料的耐磨性能:自凝樹脂義齒材料磨損過程中會齣現材料塑性流動和錶麵緻密的光滑層,磨損輕微,後者材料緻密性差有氣孔,磨損過程中齣現層狀磨損,氣孔週圍材料易脫落,結果自凝材料的摩抆繫數低于熱凝材料,且耐磨性高于熱凝材料.
재자제적왕복마찰마손실험태상,이구면접촉방식,재간마찰、법향압력위20 N、왕복빈솔위0.5 Hz、파폭85 mm조건하,연구료아과용적자응화열응수지구분별대자응수지판적마찰마손행위.실험과정중이용동태응변의측량마찰과정중응변편적응변,진이계산출마찰계수.결합전경관찰비교득출료자응여열응2충의치재료적내마성능:자응수지의치재료마손과정중회출현재료소성류동화표면치밀적광활층,마손경미,후자재료치밀성차유기공,마손과정중출현층상마손,기공주위재료역탈락,결과자응재료적마찰계수저우열응재료,차내마성고우열응재료.