塑料工业
塑料工業
소료공업
CHINA PLASTICS INDUSTRY
2012年
4期
91-95,110
,共6页
黄锦涛%何光建%廖霞%张海琛
黃錦濤%何光建%廖霞%張海琛
황금도%하광건%료하%장해침
聚丙烯%长支链%氯化钠%流变性能%超临界二氧化碳%发泡
聚丙烯%長支鏈%氯化鈉%流變性能%超臨界二氧化碳%髮泡
취병희%장지련%록화납%류변성능%초림계이양화탄%발포
制备了线性和长支链聚丙烯/氯化钠(NaCl)共混物,通过流变仪、差示扫描量热仪(DSC)及超临界二氧化碳发泡方法研究了共混物的流变性能、热性能及发泡形态.流变结果表明,紫外辐照挤出改性后的聚丙烯(PP)样品都接入了长支链,NaCl的加入没有改变长支链结构,且NaCl加入得越多,拉伸黏度越小.通过DSC可知,随着长支链的引入,聚丙烯的熔程变宽,结晶温度有所提升,而NaCl的加入使得结晶温度下降,熔点变化不大.通过紫外辐照反应挤出改性引入长支链可有效改善PP的发泡形态.加入致孔剂可制得开孔材料,开孔程度随着致孔剂的含量的增大而增大.
製備瞭線性和長支鏈聚丙烯/氯化鈉(NaCl)共混物,通過流變儀、差示掃描量熱儀(DSC)及超臨界二氧化碳髮泡方法研究瞭共混物的流變性能、熱性能及髮泡形態.流變結果錶明,紫外輻照擠齣改性後的聚丙烯(PP)樣品都接入瞭長支鏈,NaCl的加入沒有改變長支鏈結構,且NaCl加入得越多,拉伸黏度越小.通過DSC可知,隨著長支鏈的引入,聚丙烯的鎔程變寬,結晶溫度有所提升,而NaCl的加入使得結晶溫度下降,鎔點變化不大.通過紫外輻照反應擠齣改性引入長支鏈可有效改善PP的髮泡形態.加入緻孔劑可製得開孔材料,開孔程度隨著緻孔劑的含量的增大而增大.
제비료선성화장지련취병희/록화납(NaCl)공혼물,통과류변의、차시소묘량열의(DSC)급초림계이양화탄발포방법연구료공혼물적류변성능、열성능급발포형태.류변결과표명,자외복조제출개성후적취병희(PP)양품도접입료장지련,NaCl적가입몰유개변장지련결구,차NaCl가입득월다,랍신점도월소.통과DSC가지,수착장지련적인입,취병희적용정변관,결정온도유소제승,이NaCl적가입사득결정온도하강,용점변화불대.통과자외복조반응제출개성인입장지련가유효개선PP적발포형태.가입치공제가제득개공재료,개공정도수착치공제적함량적증대이증대.