塑料科技
塑料科技
소료과기
PLASTICS SCIENCE AND TECHNOLOGY
2010年
10期
55-58
,共4页
范淑红%阙永生%高鑫%江太君
範淑紅%闕永生%高鑫%江太君
범숙홍%궐영생%고흠%강태군
针状微胶囊氢氧化镁%乙烯-乙酸乙烯共聚物%纳米复合材科%热稳定性%流变性能%力学性能
針狀微膠囊氫氧化鎂%乙烯-乙痠乙烯共聚物%納米複閤材科%熱穩定性%流變性能%力學性能
침상미효낭경양화미%을희-을산을희공취물%납미복합재과%열은정성%류변성능%역학성능
将自制针状微胶囊纳米氢氧化镁(Mg(OH)2)与乙烯-乙酸乙烯共聚物(EVA)经双螺杆挤出机熔融共混挤出造粒,然后利用注射机制成针状徽胶囊Mg(OH)2/EVA纳米复合材料,对其力学性能、热稳定性和流变性能进行了研究.结果表明:纳米Mg(OH)2用量为4%时,复合材料的拉伸强度最大,加工流动性较好;在低温区时,纳米Mg(OH)2含量对复合材料的热稳定性能几乎没有影响,在高温区时,纳米Mg(OH)2的加入使其热稳定性略有提高.
將自製針狀微膠囊納米氫氧化鎂(Mg(OH)2)與乙烯-乙痠乙烯共聚物(EVA)經雙螺桿擠齣機鎔融共混擠齣造粒,然後利用註射機製成針狀徽膠囊Mg(OH)2/EVA納米複閤材料,對其力學性能、熱穩定性和流變性能進行瞭研究.結果錶明:納米Mg(OH)2用量為4%時,複閤材料的拉伸彊度最大,加工流動性較好;在低溫區時,納米Mg(OH)2含量對複閤材料的熱穩定性能幾乎沒有影響,在高溫區時,納米Mg(OH)2的加入使其熱穩定性略有提高.
장자제침상미효낭납미경양화미(Mg(OH)2)여을희-을산을희공취물(EVA)경쌍라간제출궤용융공혼제출조립,연후이용주사궤제성침상휘효낭Mg(OH)2/EVA납미복합재료,대기역학성능、열은정성화류변성능진행료연구.결과표명:납미Mg(OH)2용량위4%시,복합재료적랍신강도최대,가공류동성교호;재저온구시,납미Mg(OH)2함량대복합재료적열은정성능궤호몰유영향,재고온구시,납미Mg(OH)2적가입사기열은정성략유제고.