生物医学工程与临床
生物醫學工程與臨床
생물의학공정여림상
BIOMEDICAL ENGINEERING AND CLINICAL MEDICINE
2005年
5期
271-273
,共3页
罗小惠%谢理哲%鲍华%王杭%樊瑜波
囉小惠%謝理哲%鮑華%王杭%樊瑜波
라소혜%사리철%포화%왕항%번유파
下颌骨骨折%小型接骨板%坚强内固定%建模
下頜骨骨摺%小型接骨闆%堅彊內固定%建模
하합골골절%소형접골판%견강내고정%건모
目的针对临床中的下颌骨骨折内固定问题,建立小型接骨板模型和下颌骨的独立的几何模型,为下颌骨骨折内固定建模提供一种方法.方法通过Pro/E和ANSYS建立下颌骨骨折内固定治疗模型.首先,对168层下颌骨CT图像进行预处理,突出图像中的下颌骨轮廓,然后采用自编程序提取图中下颌骨内外轮廓点信息,最后通过有限元软件进行自下而上的实体模型建立.在Pro/E中建立螺钉和接骨板的模型,通过IGES格式转入有限元软件,最终建立下颌骨内固定骨折模型.结果和结论本模型可以较方便、真实地模拟下颌骨骨折多发部位的各种内固定方法,为后期的有限元分析提供几何构型和材料分组较为精确的模型.
目的針對臨床中的下頜骨骨摺內固定問題,建立小型接骨闆模型和下頜骨的獨立的幾何模型,為下頜骨骨摺內固定建模提供一種方法.方法通過Pro/E和ANSYS建立下頜骨骨摺內固定治療模型.首先,對168層下頜骨CT圖像進行預處理,突齣圖像中的下頜骨輪廓,然後採用自編程序提取圖中下頜骨內外輪廓點信息,最後通過有限元軟件進行自下而上的實體模型建立.在Pro/E中建立螺釘和接骨闆的模型,通過IGES格式轉入有限元軟件,最終建立下頜骨內固定骨摺模型.結果和結論本模型可以較方便、真實地模擬下頜骨骨摺多髮部位的各種內固定方法,為後期的有限元分析提供幾何構型和材料分組較為精確的模型.
목적침대림상중적하합골골절내고정문제,건립소형접골판모형화하합골적독립적궤하모형,위하합골골절내고정건모제공일충방법.방법통과Pro/E화ANSYS건립하합골골절내고정치료모형.수선,대168층하합골CT도상진행예처리,돌출도상중적하합골륜곽,연후채용자편정서제취도중하합골내외륜곽점신식,최후통과유한원연건진행자하이상적실체모형건립.재Pro/E중건립라정화접골판적모형,통과IGES격식전입유한원연건,최종건립하합골내고정골절모형.결과화결론본모형가이교방편、진실지모의하합골골절다발부위적각충내고정방법,위후기적유한원분석제공궤하구형화재료분조교위정학적모형.