CAJ | 학술논문

针对某笔记本测试线存在的生产线平衡率低、工位安排不合理、移动距离过长等问题,提出运用工作研究方法加以解决.首先阐述了笔记本测试线的现状,然后用流程程序分析法改善其工艺流程,优化生产线的平面布局,最后对生产线的三个瓶颈工序,全功能测试、QC检验、点胶进行了调整改善.通过改进,缩短了搬运距离,提高了生产线效率,生产线平衡率由原来的72.6%提高到80.8%.
침대모필기본측시선존재적생산선평형솔저、공위안배불합리、이동거리과장등문제,제출운용공작연구방법가이해결.수선천술료필기본측시선적현상,연후용류정정서분석법개선기공예류정,우화생산선적평면포국,최후대생산선적삼개병경공서,전공능측시、QC검험、점효진행료조정개선.통과개진,축단료반운거리,제고료생산선효솔,생산선평형솔유원래적72.6%제고도80.8%.
This paper applied the methods of work study to a certain laptop test lines,where low balance rate, unreasonable process arrangement and too long moving distance occurred.Firstly,the state quo of the laptop test lines was described.Then, the product process and the layout were optimized.Finally, three bottleneck station of full-function testing, QC testing, and slicking glue-water were improved.Through these, the moving distance was reduced, the product efficiency was enhanced,and the balance rate was increased from 72.6 % to 80.8%.