包钢科技
包鋼科技
포강과기
SCIENCE & TECHNOLOGY OF BAOTOU STEEL(GROUP) CORPORATION
2008年
4期
7-9
,共3页
低硅烧结%碱度%实验室试验
低硅燒結%堿度%實驗室試驗
저규소결%감도%실험실시험
在包钢现场原料条件下,进行了提铁降硅试验室试验,当烧结矿w(SiO2)从5.0%降低至4.8%、4.5%时,进行了不同碱度的烧结杯试验及冶金性能试验,试验结果表明:烧结矿的w(SiO2)降至4.5%,高碱度是保证烧结矿强度的关键.包钢目前原料条件下,低硅烧结矿碱度下限的控制不应低于2.0.
在包鋼現場原料條件下,進行瞭提鐵降硅試驗室試驗,噹燒結礦w(SiO2)從5.0%降低至4.8%、4.5%時,進行瞭不同堿度的燒結杯試驗及冶金性能試驗,試驗結果錶明:燒結礦的w(SiO2)降至4.5%,高堿度是保證燒結礦彊度的關鍵.包鋼目前原料條件下,低硅燒結礦堿度下限的控製不應低于2.0.
재포강현장원료조건하,진행료제철강규시험실시험,당소결광w(SiO2)종5.0%강저지4.8%、4.5%시,진행료불동감도적소결배시험급야금성능시험,시험결과표명:소결광적w(SiO2)강지4.5%,고감도시보증소결광강도적관건.포강목전원료조건하,저규소결광감도하한적공제불응저우2.0.