锻压装备与制造技术
鍛壓裝備與製造技術
단압장비여제조기술
METALFORMING MACHINERY
2010年
2期
53-56
,共4页
机械制造%偏心距%偏心套%压力机
機械製造%偏心距%偏心套%壓力機
궤계제조%편심거%편심투%압력궤
一对偏心套偏心距超差的补救,除采用选配法、投料法、修配法外,还可采用"借镗"中心孔的方法."借镗"中心孔将导致偏心套上的齿圈变成"偏心齿轮",影响齿轮啮合时的重合度和齿侧间隙,但通过计算可知,只要"借镗"量控制在一定范围内,可满足齿轮的正确啮合条件.
一對偏心套偏心距超差的補救,除採用選配法、投料法、脩配法外,還可採用"藉鏜"中心孔的方法."藉鏜"中心孔將導緻偏心套上的齒圈變成"偏心齒輪",影響齒輪齧閤時的重閤度和齒側間隙,但通過計算可知,隻要"藉鏜"量控製在一定範圍內,可滿足齒輪的正確齧閤條件.
일대편심투편심거초차적보구,제채용선배법、투료법、수배법외,환가채용"차당"중심공적방법."차당"중심공장도치편심투상적치권변성"편심치륜",영향치륜교합시적중합도화치측간극,단통과계산가지,지요"차당"량공제재일정범위내,가만족치륜적정학교합조건.