CAJ | 학술논문

RFQ加速器中的二极模场给束流施加一个偏转力,导致束流损失在机器上.因此,必须采取降低二极模场的措施.人们提出采用二极模稳定杆使二极模频率远离四极工作模.在一台RFQ冷模上开展的实验研究中,发现了一些与二极模稳定杆作用机理相关的新现象,本文报告这些实验结果,并对其进行分析解释.根据这些结果,提出,利用非对称性地插入二极模稳定杆,可以降低非对称RFQ腔体中的二极模场分量.
RFQ가속기중적이겁모장급속류시가일개편전력,도치속류손실재궤기상.인차,필수채취강저이겁모장적조시.인문제출채용이겁모은정간사이겁모빈솔원리사겁공작모.재일태RFQ랭모상개전적실험연구중,발현료일사여이겁모은정간작용궤리상관적신현상,본문보고저사실험결과,병대기진행분석해석.근거저사결과,제출,이용비대칭성지삽입이겁모은정간,가이강저비대칭RFQ강체중적이겁모장분량.
Dipole field in an RFQ accelerator exerts beam a bending force and thus results in beam losses on the machine.Measures must be taken to diminish the influence of the dipole field.Dipole stabilizer rod was proposed to shift the dipole modes far from the working quadrupole mode.In our recent measurements on a cold model RFQ,we observed some new phenomena associated with the function of dipole stabilizer rods.In this paper we report our results and give an analysis on these results.A new idea of imbalance insertion of the dipole stabilizer rods is proposed for both shifting dipole mode and reducing the dipole components in an asymmetrical RFQ.