CAJ | 학술논문

针对相交圆弧修形滚针、对数轮廓滚针及不同凸度量的对数凸型滚针,进行了摆动工况条件下滚针轴承的疲劳寿命试验研究.试验结果表明,对数轮廓滚针的润滑状态和承载能力明显好于相交圆弧修形滚针;凸度量不足会导致边缘效应,但凸度量过大同样会降低承载能力,即某确定工况下凸度量存在最优值;对于凸度量相同的一组滚针,高速轻载工况下的承载能力明显好于低速重载工况,这与高速轻载工况下的润滑状态较好有关.
침대상교원호수형곤침、대수륜곽곤침급불동철도량적대수철형곤침,진행료파동공황조건하곤침축승적피로수명시험연구.시험결과표명,대수륜곽곤침적윤활상태화승재능력명현호우상교원호수형곤침;철도량불족회도치변연효응,단철도량과대동양회강저승재능력,즉모학정공황하철도량존재최우치;대우철도량상동적일조곤침,고속경재공황하적승재능력명현호우저속중재공황,저여고속경재공황하적윤활상태교호유관.
Tbe fatigue life tests of needle roller bearing under oscillation working condition were carried out based on intersecting arc trimming needle roller,logarithm profile needle roller and logarithm convex needle roller with different convex values.The tests results show that the lubricating status and carrying capacity of logarithm profile needle roller are better than the ones of intersecting arc trimming needle roller;the deficiency of convex value can lead to edge effect,but excessive convex value can also reduce carrying capacity,i.e.there is a optimum value for convex value;for a set of needle rollers with same convex value,the carrying capacity under high speed and light load condition is better than the one under low speed and heavy load condition,and the good lubricating status under high speed and light load condition is the main reason.