南通大学学报(医学版)
南通大學學報(醫學版)
남통대학학보(의학판)
JOURNAL OF NANTONG UNIVERSITY(MEDICAL SCIENCES)
2006年
6期
424-426
,共3页
四角融合术%融合器%新型内固定
四角融閤術%融閤器%新型內固定
사각융합술%융합기%신형내고정
目的:研发新型四角腕骨融合器.方法:根据所测国人头、月、三角和钩骨关节有关数据设计草图,选用钛合金制出粗样,然后置入新鲜尸体腕关节标本模拟四角腕骨融合术,修改后制作成品.结果:四角腕骨融合器的钢板部分由锥形板和相连的中心圆桶状结构组成.锥形板开有4个螺钉孔,各通过一根松质骨螺钉与4块腕骨固定,中心圆桶状结构中空可供植骨,外侧面制有螺纹与腕骨紧密咬合,同时制作了配套工具.结论:四角腕骨融合器可使4块腕骨间的固定强度大大提高,并可防止融合体向关节中心的旋转和塌陷,是局限性腕骨融合术中新型、可靠的内固定方式.
目的:研髮新型四角腕骨融閤器.方法:根據所測國人頭、月、三角和鉤骨關節有關數據設計草圖,選用鈦閤金製齣粗樣,然後置入新鮮尸體腕關節標本模擬四角腕骨融閤術,脩改後製作成品.結果:四角腕骨融閤器的鋼闆部分由錐形闆和相連的中心圓桶狀結構組成.錐形闆開有4箇螺釘孔,各通過一根鬆質骨螺釘與4塊腕骨固定,中心圓桶狀結構中空可供植骨,外側麵製有螺紋與腕骨緊密咬閤,同時製作瞭配套工具.結論:四角腕骨融閤器可使4塊腕骨間的固定彊度大大提高,併可防止融閤體嚮關節中心的鏇轉和塌陷,是跼限性腕骨融閤術中新型、可靠的內固定方式.
목적:연발신형사각완골융합기.방법:근거소측국인두、월、삼각화구골관절유관수거설계초도,선용태합금제출조양,연후치입신선시체완관절표본모의사각완골융합술,수개후제작성품.결과:사각완골융합기적강판부분유추형판화상련적중심원통상결구조성.추형판개유4개라정공,각통과일근송질골라정여4괴완골고정,중심원통상결구중공가공식골,외측면제유라문여완골긴밀교합,동시제작료배투공구.결론:사각완골융합기가사4괴완골간적고정강도대대제고,병가방지융합체향관절중심적선전화탑함,시국한성완골융합술중신형、가고적내고정방식.