热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2008年
3期
71-73
,共3页
范立坤%王荣%张平%丁文江
範立坤%王榮%張平%丁文江
범립곤%왕영%장평%정문강
镁合金%冲压%成型极限比%压边力%冲压设备
鎂閤金%遲壓%成型極限比%壓邊力%遲壓設備
미합금%충압%성형겁한비%압변력%충압설비
对AZ31镁合金板料在等温条件下的拉深成型性能进行了研究.结果表明:在精确控制压边力以及采用良好的润滑条件的前提下,AZ31镁合金板料在200℃以下具有良好的拉深成型能力;当成型温度为150℃时.极限拉深比为2.0.当在100℃进行拉深时,单位压边力数值最大;单位压边强度随温度的变化规律与拉深成型过程中材料的软化与硬化作用有关.
對AZ31鎂閤金闆料在等溫條件下的拉深成型性能進行瞭研究.結果錶明:在精確控製壓邊力以及採用良好的潤滑條件的前提下,AZ31鎂閤金闆料在200℃以下具有良好的拉深成型能力;噹成型溫度為150℃時.極限拉深比為2.0.噹在100℃進行拉深時,單位壓邊力數值最大;單位壓邊彊度隨溫度的變化規律與拉深成型過程中材料的軟化與硬化作用有關.
대AZ31미합금판료재등온조건하적랍심성형성능진행료연구.결과표명:재정학공제압변력이급채용량호적윤활조건적전제하,AZ31미합금판료재200℃이하구유량호적랍심성형능력;당성형온도위150℃시.겁한랍심비위2.0.당재100℃진행랍심시,단위압변력수치최대;단위압변강도수온도적변화규률여랍심성형과정중재료적연화여경화작용유관.