精细石油化工进展
精細石油化工進展
정세석유화공진전
ADVANCES IN FINE PETROCHEMICALS
2004年
11期
20-22
,共3页
汤杨%曾光明%单文伟%彭敏
湯楊%曾光明%單文偉%彭敏
탕양%증광명%단문위%팽민
丙烯酸缩水甘油酯%丙烯酸钠%环氧氯丙烷%相转移法%收率
丙烯痠縮水甘油酯%丙烯痠鈉%環氧氯丙烷%相轉移法%收率
병희산축수감유지%병희산납%배양록병완%상전이법%수솔
采用充分干燥的丙烯酸钠盐为原料和减压抽滤的后处理方法,对传统丙烯酸缩水甘油酯合成工艺进行改进.探讨了丙烯酸钠纯度、含水量、催化剂及阻聚剂品种、反应条件、减压抽滤时蒸馏压力等因素对丙烯酸缩水甘油酯收率的影响.结果表明,当丙烯酸钠纯度99%以上,含水量小于0.5%,十六烷基三甲基溴化铵为催化剂,对苯二酚为阻聚剂,环氧氯丙烷与丙烯酸钠摩尔比为4.5∶1,反应温度100~105 ℃,反应时间2.5 h,减压蒸馏压力0.097 MPa时,丙烯酸缩水甘油酯收率达92%以上.
採用充分榦燥的丙烯痠鈉鹽為原料和減壓抽濾的後處理方法,對傳統丙烯痠縮水甘油酯閤成工藝進行改進.探討瞭丙烯痠鈉純度、含水量、催化劑及阻聚劑品種、反應條件、減壓抽濾時蒸餾壓力等因素對丙烯痠縮水甘油酯收率的影響.結果錶明,噹丙烯痠鈉純度99%以上,含水量小于0.5%,十六烷基三甲基溴化銨為催化劑,對苯二酚為阻聚劑,環氧氯丙烷與丙烯痠鈉摩爾比為4.5∶1,反應溫度100~105 ℃,反應時間2.5 h,減壓蒸餾壓力0.097 MPa時,丙烯痠縮水甘油酯收率達92%以上.
채용충분간조적병희산납염위원료화감압추려적후처리방법,대전통병희산축수감유지합성공예진행개진.탐토료병희산납순도、함수량、최화제급조취제품충、반응조건、감압추려시증류압력등인소대병희산축수감유지수솔적영향.결과표명,당병희산납순도99%이상,함수량소우0.5%,십륙완기삼갑기추화안위최화제,대분이분위조취제,배양록병완여병희산납마이비위4.5∶1,반응온도100~105 ℃,반응시간2.5 h,감압증류압력0.097 MPa시,병희산축수감유지수솔체92%이상.