焊接学报
銲接學報
한접학보
TRANSACTIONS OF THE CHINA WELDING INSTITUTION
2007年
3期
57-60
,共4页
刘卫红%孙大谦%孙德新%贾树盛
劉衛紅%孫大謙%孫德新%賈樹盛
류위홍%손대겸%손덕신%가수성
复合中间层%铝基复合材料%瞬间液相扩散连接
複閤中間層%鋁基複閤材料%瞬間液相擴散連接
복합중간층%려기복합재료%순간액상확산련접
用纯金属作中间层TLP连接颗粒增强铝基复合材料,接头存在增强相偏聚区,是接头力学性能的薄弱区域.控制增强相偏聚区是改善接头力学性能的一种有效途径.文中尝试用Cu,Al金属复合中间层TLP连接Al2O3P/6061Al复合材料,探讨了其接头的显微结构和力学性能特点.结果表明,用Cu,Al金属复合中间层能够控制接头增强相偏聚,改善接头抗剪强度.在连接温度600℃,保温时间60min的工艺条件下,10 μm Al/10 μm Cu/10 μm Al复合中间层接头增强相偏聚明显下降,接头抗剪强度110 MPa;1.5 μm Cu/10 μm Al/1.5 μm Cu复合中间层接头无明显的增强相偏聚,接头抗剪强度123 MPa.
用純金屬作中間層TLP連接顆粒增彊鋁基複閤材料,接頭存在增彊相偏聚區,是接頭力學性能的薄弱區域.控製增彊相偏聚區是改善接頭力學性能的一種有效途徑.文中嘗試用Cu,Al金屬複閤中間層TLP連接Al2O3P/6061Al複閤材料,探討瞭其接頭的顯微結構和力學性能特點.結果錶明,用Cu,Al金屬複閤中間層能夠控製接頭增彊相偏聚,改善接頭抗剪彊度.在連接溫度600℃,保溫時間60min的工藝條件下,10 μm Al/10 μm Cu/10 μm Al複閤中間層接頭增彊相偏聚明顯下降,接頭抗剪彊度110 MPa;1.5 μm Cu/10 μm Al/1.5 μm Cu複閤中間層接頭無明顯的增彊相偏聚,接頭抗剪彊度123 MPa.
용순금속작중간층TLP련접과립증강려기복합재료,접두존재증강상편취구,시접두역학성능적박약구역.공제증강상편취구시개선접두역학성능적일충유효도경.문중상시용Cu,Al금속복합중간층TLP련접Al2O3P/6061Al복합재료,탐토료기접두적현미결구화역학성능특점.결과표명,용Cu,Al금속복합중간층능구공제접두증강상편취,개선접두항전강도.재련접온도600℃,보온시간60min적공예조건하,10 μm Al/10 μm Cu/10 μm Al복합중간층접두증강상편취명현하강,접두항전강도110 MPa;1.5 μm Cu/10 μm Al/1.5 μm Cu복합중간층접두무명현적증강상편취,접두항전강도123 MPa.