稀有金属材料与工程
稀有金屬材料與工程
희유금속재료여공정
RARE METAL MATERIALS AND ENGINEERNG
2012年
1期
105-109
,共5页
许惠斌%曾友亮%叶宏%罗泉祥%周博芳%杜长华
許惠斌%曾友亮%葉宏%囉泉祥%週博芳%杜長華
허혜빈%증우량%협굉%라천상%주박방%두장화
铝基复合材料%氧化膜%搅拌%界面结构%半周态
鋁基複閤材料%氧化膜%攪拌%界麵結構%半週態
려기복합재료%양화막%교반%계면결구%반주태
研究了SiCp/A356复合材料非真空半固态搅拌钎焊过程.在一定的搅拌钎焊条件下,重点研究了钎料的固相率对接头的微观结构、线结合率和强度的影响规律.研究结果表明:在搅拌条件下,半固态钎料固相率对基体氧化膜的破碎有重要影响;随着钎料固相率的增加,接头界面的线结合率和接头的强度先增加后减小;在钎料固相率为60%时,接头界面线结合率和接头强度同时达到最大值,分别为91.2%和160 MPa.
研究瞭SiCp/A356複閤材料非真空半固態攪拌釬銲過程.在一定的攪拌釬銲條件下,重點研究瞭釬料的固相率對接頭的微觀結構、線結閤率和彊度的影響規律.研究結果錶明:在攪拌條件下,半固態釬料固相率對基體氧化膜的破碎有重要影響;隨著釬料固相率的增加,接頭界麵的線結閤率和接頭的彊度先增加後減小;在釬料固相率為60%時,接頭界麵線結閤率和接頭彊度同時達到最大值,分彆為91.2%和160 MPa.
연구료SiCp/A356복합재료비진공반고태교반천한과정.재일정적교반천한조건하,중점연구료천료적고상솔대접두적미관결구、선결합솔화강도적영향규률.연구결과표명:재교반조건하,반고태천료고상솔대기체양화막적파쇄유중요영향;수착천료고상솔적증가,접두계면적선결합솔화접두적강도선증가후감소;재천료고상솔위60%시,접두계면선결합솔화접두강도동시체도최대치,분별위91.2%화160 MPa.