山东冶金
山東冶金
산동야금
SHANDONG METALLURY
2005年
6期
41-43
,共3页
张婕%丛玉伟%鹿鸿利%王淑华
張婕%叢玉偉%鹿鴻利%王淑華
장첩%총옥위%록홍리%왕숙화
脱硫喷枪%枪体结构%纵裂纹%使用寿命
脫硫噴鎗%鎗體結構%縱裂紋%使用壽命
탈류분창%창체결구%종렬문%사용수명
在对脱硫喷枪损毁原因进行分析的基础上,通过减少和均衡枪芯结构造成的应力集中,改进了枪体结构设计;以莫来石质浇注料、红柱石细粉和α-Al2O3微粉作为添加剂等设计了枪体耐火材料成分,并制定了严格的喷枪制作和烘烤工艺,解决了喷枪表面纵裂的问题,成功开发出高寿命脱硫喷枪.应用表明,喷枪使用寿命由20~30次提高到100次以上,最长使用时间达到1158min.
在對脫硫噴鎗損燬原因進行分析的基礎上,通過減少和均衡鎗芯結構造成的應力集中,改進瞭鎗體結構設計;以莫來石質澆註料、紅柱石細粉和α-Al2O3微粉作為添加劑等設計瞭鎗體耐火材料成分,併製定瞭嚴格的噴鎗製作和烘烤工藝,解決瞭噴鎗錶麵縱裂的問題,成功開髮齣高壽命脫硫噴鎗.應用錶明,噴鎗使用壽命由20~30次提高到100次以上,最長使用時間達到1158min.
재대탈류분창손훼원인진행분석적기출상,통과감소화균형창심결구조성적응력집중,개진료창체결구설계;이막래석질요주료、홍주석세분화α-Al2O3미분작위첨가제등설계료창체내화재료성분,병제정료엄격적분창제작화홍고공예,해결료분창표면종렬적문제,성공개발출고수명탈류분창.응용표명,분창사용수명유20~30차제고도100차이상,최장사용시간체도1158min.