兵器材料科学与工程
兵器材料科學與工程
병기재료과학여공정
Ordnance Material Science and Engineering
2010年
3期
22-25
,共4页
田红雨%陈芙蓉%解瑞军%郝永飞
田紅雨%陳芙蓉%解瑞軍%郝永飛
전홍우%진부용%해서군%학영비
双丝MIG焊%温度场%数值模拟%7A52铝合金
雙絲MIG銲%溫度場%數值模擬%7A52鋁閤金
쌍사MIG한%온도장%수치모의%7A52려합금
采用ANSYS的"生死"单元技术,对7A52铝合金双丝MIG焊接的热过程进行数值模拟.实现多层焊中焊缝填充的动态过程,与真实试验过程完全吻合.结果表明,7A52铝合金双丝MIG焊接过程中,焊点处的峰值温度可达到837℃.
採用ANSYS的"生死"單元技術,對7A52鋁閤金雙絲MIG銲接的熱過程進行數值模擬.實現多層銲中銲縫填充的動態過程,與真實試驗過程完全吻閤.結果錶明,7A52鋁閤金雙絲MIG銲接過程中,銲點處的峰值溫度可達到837℃.
채용ANSYS적"생사"단원기술,대7A52려합금쌍사MIG한접적열과정진행수치모의.실현다층한중한봉전충적동태과정,여진실시험과정완전문합.결과표명,7A52려합금쌍사MIG한접과정중,한점처적봉치온도가체도837℃.