中国有色金属学报
中國有色金屬學報
중국유색금속학보
THE CHINESE JOURNAL OF NONFERROUS METALS
2004年
12期
2073-2078
,共6页
张琦%李丘林%李廷举%郑贤淑%金俊泽
張琦%李丘林%李廷舉%鄭賢淑%金俊澤
장기%리구림%리정거%정현숙%금준택
电磁连续铸造%空心管坯%热交换系数
電磁連續鑄造%空心管坯%熱交換繫數
전자련속주조%공심관배%열교환계수
将实验得到的初始凝固坯壳的形状与数值模拟结果相结合的反推法确定了内结晶器冷却水量与内结晶器侧壁换热系数之间的关系,模拟了冷却水流量为80、100、120 L/s时凝固坯壳的形状和位置;在模拟得到的固-液界面位置附近,即距液面5~20 mm处施加了频率为2 500Hz的电磁场.结果表明:与传统连铸方法相比,施加电磁场后空心管坯的质量得到了明显的改善.
將實驗得到的初始凝固坯殼的形狀與數值模擬結果相結閤的反推法確定瞭內結晶器冷卻水量與內結晶器側壁換熱繫數之間的關繫,模擬瞭冷卻水流量為80、100、120 L/s時凝固坯殼的形狀和位置;在模擬得到的固-液界麵位置附近,即距液麵5~20 mm處施加瞭頻率為2 500Hz的電磁場.結果錶明:與傳統連鑄方法相比,施加電磁場後空心管坯的質量得到瞭明顯的改善.
장실험득도적초시응고배각적형상여수치모의결과상결합적반추법학정료내결정기냉각수량여내결정기측벽환열계수지간적관계,모의료냉각수류량위80、100、120 L/s시응고배각적형상화위치;재모의득도적고-액계면위치부근,즉거액면5~20 mm처시가료빈솔위2 500Hz적전자장.결과표명:여전통련주방법상비,시가전자장후공심관배적질량득도료명현적개선.